Fitting beehive springs.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Friendly
- Posts: 15
- Joined: Sat Nov 20, 2021 11:27 pm
- MMOC Member: No
Fitting beehive springs.
Does anyone have any tips for removing and fitting the beehive springs into the rear brake shoes. I've seen people say they aren't needed but I wasn't sure myself.
I apologise if I'm bringing up an old argument.
Thanks.
I apologise if I'm bringing up an old argument.
Thanks.
Last edited by Thomas.hewitt05 on Wed May 15, 2024 8:31 pm, edited 1 time in total.
-
- Minor Maniac
- Posts: 10905
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
Re: Fitting beehive springs.
I use a short pair of pointed nose pliers inserted into the centre of the bee hive spring.
- svenedin
- Minor Legend
- Posts: 1965
- Joined: Fri Aug 29, 2014 9:27 am
- Location: Surrey
- MMOC Member: Yes
Re: Fitting beehive springs.
See this thread that I started a while back. It is not an argument but specifically about how to fit the springs.
viewtopic.php?t=77310&hilit=Beehive+springs+again
Stephen
viewtopic.php?t=77310&hilit=Beehive+springs+again
Stephen
1969 1098cc Convertible “Xavier” which I have owned since 1989.
Stephen
Stephen
-
- Minor Fan
- Posts: 181
- Joined: Tue May 14, 2019 4:49 pm
- Location: Staffordshire Moorlands
- MMOC Member: No
Re: Fitting beehive springs.
Previously I used a pair of long nosed pliers. I now have a homemade "special" tool comprising of a 1/4" drive 5.5mm deep socket and a 1/4" nut driver. A slot has to be cut into the socket to accomodate the spring. Picture?
- svenedin
- Minor Legend
- Posts: 1965
- Joined: Fri Aug 29, 2014 9:27 am
- Location: Surrey
- MMOC Member: Yes
Re: Fitting beehive springs.
Please show the tool you made. I am not very skilled at making stuff but that is probably something I could do.
Stephen
1969 1098cc Convertible “Xavier” which I have owned since 1989.
Stephen
Stephen
-
- Minor Legend
- Posts: 1098
- Joined: Wed May 16, 2018 10:49 pm
- MMOC Member: Yes
Re: Fitting beehive springs.
- svenedin
- Minor Legend
- Posts: 1965
- Joined: Fri Aug 29, 2014 9:27 am
- Location: Surrey
- MMOC Member: Yes
Re: Fitting beehive springs.
Excellent. Thank you. Now that is really interesting. I did not realise that the design of the spring hook has completely changed!Myrtles Man wrote: ↑Thu May 16, 2024 12:02 pmHave a look at 6min 16sec in on this video...
https://www.youtube.com/watch?v=v7owZ6_Lsl0
Stephen
1969 1098cc Convertible “Xavier” which I have owned since 1989.
Stephen
Stephen
- Bill_qaz
- Minor Addict
- Posts: 710
- Joined: Fri Jan 14, 2022 7:31 pm
- Location: Oxfordshire
- MMOC Member: Yes
Re: Fitting beehive springs.
With the leg of the parts supplied hook shortened I found no need to rotate them, just compress with pliers and slide behind the backplate lug.svenedin wrote: ↑Thu May 16, 2024 2:52 pmExcellent. Thank you. Now that is really interesting. I did not realise that the design of the spring hook has completely changed!Myrtles Man wrote: ↑Thu May 16, 2024 12:02 pmHave a look at 6min 16sec in on this video...
https://www.youtube.com/watch?v=v7owZ6_Lsl0
Stephen
Regards Bill
- svenedin
- Minor Legend
- Posts: 1965
- Joined: Fri Aug 29, 2014 9:27 am
- Location: Surrey
- MMOC Member: Yes
Re: Fitting beehive springs.
Yes. I didn’t modify my modern springs because I wasn’t quite sure how to cut the hook down. It’s heavy gauge wire. Also, replacing the shoes is not a frequent job for me by any means.Bill_qaz wrote: ↑Thu May 16, 2024 3:15 pmWith the leg of the parts supplied hook shortened I found no need to rotate them, just compress with pliers and slide behind the backplate lug.svenedin wrote: ↑Thu May 16, 2024 2:52 pmExcellent. Thank you. Now that is really interesting. I did not realise that the design of the spring hook has completely changed!Myrtles Man wrote: ↑Thu May 16, 2024 12:02 pm
Have a look at 6min 16sec in on this video...
https://www.youtube.com/watch?v=v7owZ6_Lsl0
Stephen
Stephen
1969 1098cc Convertible “Xavier” which I have owned since 1989.
Stephen
Stephen
- Bill_qaz
- Minor Addict
- Posts: 710
- Joined: Fri Jan 14, 2022 7:31 pm
- Location: Oxfordshire
- MMOC Member: Yes
Re: Fitting beehive springs.
I just held it in the vice and used a hacksaw, they cut very easilysvenedin wrote: ↑Thu May 16, 2024 3:19 pm
Yes. I didn’t modify my modern springs because I wasn’t quite sure how to cut the hook down. It’s heavy gauge wire. Also, replacing the shoes is not a frequent job for me by any means.
Stephen
Regards Bill
- svenedin
- Minor Legend
- Posts: 1965
- Joined: Fri Aug 29, 2014 9:27 am
- Location: Surrey
- MMOC Member: Yes
Re: Fitting beehive springs.
Good to know. I can do that! As I said I was too lazy to even try.Bill_qaz wrote: ↑Thu May 16, 2024 4:43 pmI just held it in the vice and used a hacksaw, they cut very easily
Stephen
1969 1098cc Convertible “Xavier” which I have owned since 1989.
Stephen
Stephen
-
- Minor Fan
- Posts: 181
- Joined: Tue May 14, 2019 4:49 pm
- Location: Staffordshire Moorlands
- MMOC Member: No
Re: Fitting beehive springs.
Same idea as in that video. I seem to remember posting a comparison picture highlighting the difference between original and new springs.