NMP plates
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Legend
- Posts: 3010
- Joined: Sun Sep 09, 2007 10:42 pm
- Location: Whiteabbey, Co Antrim
- MMOC Member: Yes
NMP plates
Heres a good replica of the body plate on ebay at the moment, just needs a batch with no numbers on them! I think only one of my cars still has this on it, they always end up rotten
http://www.ebay.co.uk/itm/Morris-Minor- ... Sw--1WqLTK
http://www.ebay.co.uk/itm/Morris-Minor- ... Sw--1WqLTK
Too many Minors so little time.....
-
- Minor Legend
- Posts: 3023
- Joined: Mon Jun 07, 2010 6:17 pm
- Location: Gloucester
- MMOC Member: No
Re: NMP plates
For a c3/49 MM 2dr
No holes on later Minor's ie ones fitted to NSF engine bay floor - this one for front crossmember.
Excellent reproduction!
No holes on later Minor's ie ones fitted to NSF engine bay floor - this one for front crossmember.
Excellent reproduction!
Further investigations uncovered it was an inside job!!
Re: NMP plates
If anyone is desperate for a NMP plate I can still produce these
taupe wrote:
The top strip in the pic is the body number plate from the main bulkhead above where the wiper motor is on my car. The middle one is the replacemant I have made by making up a press tool from Rob Thomas's original at the bottom using a soft mould and tooling resin.
This is incidentally the earlier type plate... its generally the same as later ones, but the writing is slightly smaller
PM me if interested.
Taupe
-
- Minor Addict
- Posts: 956
- Joined: Fri Aug 26, 2011 12:42 pm
- Location: West Yorkshire
- MMOC Member: Yes
Re: NMP plates
Fabulous workmanship - but in the wrong hands even more worries about identity theft.
-
- Minor Legend
- Posts: 3023
- Joined: Mon Jun 07, 2010 6:17 pm
- Location: Gloucester
- MMOC Member: No
Re: NMP plates
Provided the "top tag" is present on the b/head, a case of having the ns glovebox out and examinine the threads of the fixing screws - great difference between "undisturbed for 50yrs" and "moved recently"....Mark Wilson wrote:Fabulous workmanship - but in the wrong hands even more worries about identity theft.
Further investigations uncovered it was an inside job!!
Re: NMP plates
Mark Wilson wrote:Fabulous workmanship - but in the wrong hands even more worries about identity theft.
Mark
I only issue these once the buyer has provided a rubbing or photo of their bulkhead tag.
Taupe
-
- Minor Legend
- Posts: 3635
- Joined: Fri Apr 11, 2008 7:28 pm
- Location: Mansfield, Nottinghamshire.
- MMOC Member: Yes
Re: NMP plates
Hi Taupe,
As an aside, how is the Traveller restoration coming along?
Best wishes,
Mike.
As an aside, how is the Traveller restoration coming along?
Best wishes,
Mike.
1954 Series 2: 4 door: "Sally" -- Back on the ground with (slave) wheels and waiting to be resprayed......
1970 Triumph Herald 1200: "Hetty" -- Driven back from Llangollen in Wales (twice.....)
1970 Triumph Herald 1200: "Hetty" -- Driven back from Llangollen in Wales (twice.....)
-
- Minor Legend
- Posts: 3023
- Joined: Mon Jun 07, 2010 6:17 pm
- Location: Gloucester
- MMOC Member: No
Re: NMP plates
Finally, have a transitional Trav Bodyshell code...jagnut66 wrote:Hi Taupe,
As an aside, how is the Traveller restoration coming along?
Best wishes,
Mike.
Thanks Mr.T
Need a convertible to finish the UK car section of the id booklet....
Further investigations uncovered it was an inside job!!
-
- Minor Addict
- Posts: 956
- Joined: Fri Aug 26, 2011 12:42 pm
- Location: West Yorkshire
- MMOC Member: Yes
Re: NMP plates
That is completely reassuring, thanks. The chap advertising on eBay also sounds to be completely genuine, but would be advised to follow the same procedure for the blank ones he may produce. I know that the only people I've found advertising to engrave new chassis plates require a V5 with the order, but this wouldn't be of any use for verification of an NMP or bulkhead plate.taupe wrote:Mark Wilson wrote:Fabulous workmanship - but in the wrong hands even more worries about identity theft.
Mark
I only issue these once the buyer has provided a rubbing or photo of their bulkhead tag.
Taupe
Mark
Re: NMP plates
Thanks for asking..jagnut66 wrote:Hi Taupe,
As an aside, how is the Traveller restoration coming along?
Best wishes,
Mike.
Ive done a more few bits but work on the new house build is taking precedence at the moment.
Taupe
-
- Minor Legend
- Posts: 2946
- Joined: Tue Aug 25, 2015 6:07 pm
- MMOC Member: No
Re: NMP plates
Taupe, have tried PM but no avail thus far. Are you still producing the NMP plates as mine is missing after a new chassis leg about 20 years ago. ? Please , pretty please etc
JM
JM
-
- Minor Legend
- Posts: 3023
- Joined: Mon Jun 07, 2010 6:17 pm
- Location: Gloucester
- MMOC Member: No
Re: NMP plates
Ditto, have had a few requests too...
as above, with additional sugar on top....
as above, with additional sugar on top....
Further investigations uncovered it was an inside job!!
-
- Minor Legend
- Posts: 3635
- Joined: Fri Apr 11, 2008 7:28 pm
- Location: Mansfield, Nottinghamshire.
- MMOC Member: Yes
Re: NMP plates
Sounds like he's up to his neck in bricks 'n' mortar at present.Ive done a more few bits but work on the new house build is taking precedence at the moment.
Good luck with the house build Taupe, I hope it all goes relatively smoothly, so you can quickly get back to the important things in life, like rebuilding classic cars!
I take it you've included a fair sized workshop in your construction plans?..............
Best wishes,
Mike.
1954 Series 2: 4 door: "Sally" -- Back on the ground with (slave) wheels and waiting to be resprayed......
1970 Triumph Herald 1200: "Hetty" -- Driven back from Llangollen in Wales (twice.....)
1970 Triumph Herald 1200: "Hetty" -- Driven back from Llangollen in Wales (twice.....)
-
- Minor Legend
- Posts: 2646
- Joined: Thu May 11, 2006 10:34 am
- Location: Cardiff
- MMOC Member: Yes
Re: NMP plates
The original plate shown in the photo at the top of the page was mine. Taupe copied the shape from that and he sent me one as a thank-you for the loan of the original. I have to say that the quality of his product was astounding, as are all the parts he made for his Trav.
I hope the house build goes well, and fast. I miss seeing his bodywork pictures posted up on here!
I hope the house build goes well, and fast. I miss seeing his bodywork pictures posted up on here!
Cardiff, UK
-
- Minor Legend
- Posts: 2946
- Joined: Tue Aug 25, 2015 6:07 pm
- MMOC Member: No
Re: NMP plates
Has anyone heard from Taupe on this matter . I have tried PM' ing him to no avail but would sell various organs to get one of these plates.
-
- Minor Legend
- Posts: 2946
- Joined: Tue Aug 25, 2015 6:07 pm
- MMOC Member: No
Re: NMP plates
If anyone knows him or is in touch by a method other than this one, please let him know of the interest. If he brings some to the National I am sure he would sell the lot!