Hi My Friends
have you use DM2 Side entry Cap for 25D distributor without any problem ? I have seen 25D/25D4 Distributor with DM2 side entry cap , what you think about that , is it wrong ?
Regards
Sandun
25D distributor
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Addict
- Posts: 746
- Joined: Thu Jun 30, 2011 11:37 am
- Location: Sri Lanka
- MMOC Member: No
Re: 25D distributor
25D/ 25D4 cap
- Attachments
-
- p-3950-25D-Distributor-Cap(1).jpg (57.27 KiB) Viewed 1030 times
Re: 25D distributor
Sandun
Both top and side entry caps will fit a Lucas 25 D distributor. They where fitted to a number of classic cars in their day and work perfectly well.
If you were wanting to swop over the type of cap then the issue to consider is the " length " of the HT leads from the cap to the spark plugs. You don't want the leads too tight / rubbing against other bits in the engine bay ( this would eventually lead to a damaged lead and misfires ).
Like most cables / hoses / electrical leads in a car you want " gentle " curves , no sharp bends or tight runs so that it rubs against other parts causing damage. At the other extreme , you don't want too much " slack " that it gets caught up in moving parts !
Bob
Both top and side entry caps will fit a Lucas 25 D distributor. They where fitted to a number of classic cars in their day and work perfectly well.
If you were wanting to swop over the type of cap then the issue to consider is the " length " of the HT leads from the cap to the spark plugs. You don't want the leads too tight / rubbing against other bits in the engine bay ( this would eventually lead to a damaged lead and misfires ).
Like most cables / hoses / electrical leads in a car you want " gentle " curves , no sharp bends or tight runs so that it rubs against other parts causing damage. At the other extreme , you don't want too much " slack " that it gets caught up in moving parts !
Bob
-
- Minor Maniac
- Posts: 10809
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
Re: 25D distributor
The side entry distributer cap can be used instead of the top entry cap on a 25D distributer.