Yes, a Series II owner decided he didn't have enough problems with tracking down parts or having such an utterly modern car to drive around in, so he bought himself a 1949 Tourer to really make things hard.
I love my Tourer, I really do. But I would just like to be safe in the knowledge that it's had new brake components front and back along with new bearings too. I'd really appreciate some help. Firstly with the delicate matter of either having the current shoes re-shoed (does anyone have any recommendations for this) or some support and guidance in replacing to the later (more familiar to me) brakes.
Secondly, bearings. What's going on in that area. I can't find any diagrams or anything of the arrangment or indeed a 'how to check' guide. They're grumbly which I'm 99% is because the car has been stood for a few years, but I want to make sure everything is hunky dory before I go further than just around the block. Can anyone help?
Thank you in advance.
Mark.
Brakes and Bearings
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Newbie
- Posts: 5
- Joined: Thu Oct 16, 2014 3:11 pm
- MMOC Member: No
Brakes and Bearings
Mark Powell
Series II Register
Marian - 1955 Series II Facelift
Series II Register
Marian - 1955 Series II Facelift
-
- Minor Legend
- Posts: 2646
- Joined: Thu May 11, 2006 10:34 am
- Location: Cardiff
- MMOC Member: Yes
Re: Brakes and Bearings
If you get a set of 7-inch 1955-ish backplates, new cylinders/shoes/springs then they are bolt-on. Just keep the drums. All 7 inch shoes are the same throughout the years. ESM sell everything you need.
Cardiff, UK
Re: Brakes and Bearings
not sure but the rears are a drum and hub in one unit,not that I've had anything to do with them,so could be wrong.
-
- Minor Legend
- Posts: 2646
- Joined: Thu May 11, 2006 10:34 am
- Location: Cardiff
- MMOC Member: Yes
Re: Brakes and Bearings
Rear bearings are easy to change and the brake components, apart from the drums themselves, are the same (-ish) as the 948.
Mark. If it helps, you can call me on o1446, 795489
Mark. If it helps, you can call me on o1446, 795489
Cardiff, UK
Re: Brakes and Bearings
The club stocks original brake cylinders and sometimes we have original type rivetted brake shoes , and also have modern bonded ones.
Bryan , Club Spares
Bryan , Club Spares
1934 Morris 10/4 in Dark Green / Black - BGO517
1953 S11 Traveller in Birch Grey - oldest survivor ? Export model now reg PPO924
1953 S11 Traveller in Black - 3rd oldest in UK PPX344
1953 S11 Traveller in Birch Grey - oldest survivor ? Export model now reg PPO924
1953 S11 Traveller in Black - 3rd oldest in UK PPX344