Hi,
I am recovering my door cards on my 2D after the 'so called' marine ply failed and split (nice Chinese plywood, I think!!!) and have a question.
The passenger door locking catch is difficult to turn as it rubs on the door card.
Should the door card be cut around the locking catch or should the catch turn over the card.
A photo would be hand, please.
Passenger door card on a 2D
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Friendly
- Posts: 86
- Joined: Sun Jul 06, 2014 6:50 am
- Location: Lancing, Sussex
- MMOC Member: Yes
Passenger door card on a 2D
1961 948cc Yukon Grey 'Her In Doors'
-
- Minor Legend
- Posts: 1956
- Joined: Wed Apr 18, 2007 7:32 am
- Location: Düsseldorf, Germany
- MMOC Member: No
Re: Passenger door card on a 2D
Use aircraft grade birch ply and it won't split. It is not cheap though.
Regards
Declan
Regards
Declan
Regards
Declan
-
- Minor Legend
- Posts: 2765
- Joined: Tue Nov 11, 2014 9:41 am
- MMOC Member: No
Re: Passenger door card on a 2D
Yes. there should be a small cut out of the card - although not the covering. That is how my car is.