Alternator Problems

Discuss Electrical problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
Daddsie
Minor Friendly
Posts: 63
Joined: Thu Mar 07, 2002 12:00 am
Location: Weymouth, Dorset
MMOC Member: No

Post by Daddsie »

Bought a 1300 metro alternator from a motor salvage dealer, in supposed working order.

Have fitted it and followed the idiots guides but on the back of this alternator is the normal two large and one small lug, PLUS diagonally opposite is a single small lug.

I get no ignition light and with engine running there is only a 12 volt reading across terminals.
catsoup
Minor Friendly
Posts: 41
Joined: Sat Mar 16, 2002 12:00 am
Location: Birmingham
MMOC Member: No

Post by catsoup »

If I remember rightly the small lug is for the ignition, and it connects to the brown wire with the yellow tracer from the control box. (There are two you need the small one, which goes to the ignition warning light.)

As you probably know the car has to be negative earth for the alternator conversion.

Hope this helps.

Cheers.
Post Reply