How is this connected and which anchorage points should it be using?
This is a Side-Valve engine and Gearbox, converted from LHD to RHD.
Clutch Pedal Return Spring
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Addict
- Posts: 978
- Joined: Thu Oct 04, 2012 5:01 pm
- Location: Farnborough, Hampshire
- MMOC Member: Yes
Clutch Pedal Return Spring
'50 Low-light with 918 Side-valve engine,
'51 High-light with Side-valve 918 engine,
'55 4-dr with 803 engine,
'56 Traveller with 1098 engine.
-
- Minor Addict
- Posts: 978
- Joined: Thu Oct 04, 2012 5:01 pm
- Location: Farnborough, Hampshire
- MMOC Member: Yes
Re: Clutch Pedal Return Spring
Drove the car up and down the cul-de-sac I live in, for a short road test and the return spring definitely needed to be connected.
Found the hole it goes into at the side of the R/H chassis leg.
Found the hole it goes into at the side of the R/H chassis leg.
'50 Low-light with 918 Side-valve engine,
'51 High-light with Side-valve 918 engine,
'55 4-dr with 803 engine,
'56 Traveller with 1098 engine.