Heater control tap - simple solution
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Addict
- Posts: 764
- Joined: Mon May 26, 2003 9:50 pm
- Location: S E Wales
- MMOC Member: Yes
Heater control tap - simple solution
Installation of heater control tap inside the car, good or bad idea??
- svenedin
- Minor Legend
- Posts: 1965
- Joined: Fri Aug 29, 2014 9:27 am
- Location: Surrey
- MMOC Member: Yes
Re: Heater control tap - simple solution
Assuming you have the “push heater” control type valve fitted (I can see the control in your photo but perhaps it is not connected at the cylinder head end) then I can’t see why you would need another control. The push heater knob isn’t just on/off. I use it to regulate the water flow and hence the heat too.
1969 1098cc Convertible “Xavier” which I have owned since 1989.
Stephen
Stephen
- geoberni
- Minor Legend
- Posts: 3652
- Joined: Fri Aug 04, 2017 11:19 am
- Location: North Leicestershire
- MMOC Member: Yes
Re: Heater control tap - simple solution
As with Stephen, I have to ask 'Why?' ![:-?](./images/smilies/icon_confused.gif)
![:-?](./images/smilies/icon_confused.gif)
Basil the 1955 series II
![Image](https://image.ibb.co/hrLO0J/DSCF8095_F.jpg)
![Image](https://image.ibb.co/hrLO0J/DSCF8095_F.jpg)
Re: Heater control tap - simple solution
If, like me, you're fed up with the cable operated valves leaking so having to revert to fitting a brass tap on the engine then I think this is a great idea. I like it ![Good'un :tu1:](./images/smilies/Icon_thumbs_up.png)
![Good'un :tu1:](./images/smilies/Icon_thumbs_up.png)
![Image](http://i163.photobucket.com/albums/t309/panky_2007/th_morris.gif)
- svenedin
- Minor Legend
- Posts: 1965
- Joined: Fri Aug 29, 2014 9:27 am
- Location: Surrey
- MMOC Member: Yes
Re: Heater control tap - simple solution
I believe there was a bad batch of cable operated valves. I had one explode quite spectacularly. ESM assure me the new ones are much better.
Stephen
1969 1098cc Convertible “Xavier” which I have owned since 1989.
Stephen
Stephen
Re: Heater control tap - simple solution
The cable operated ones, even "good" ones, have never been that great; so I think that this is a good alternative. The only downside is that both the original and new valves MY FAVOURITE CAR IS A DATSUN CHERRY off circulation to the rear of the head. The ideal is a diverter valve that passes hot water to either the heater or the return to the radiator. See viewtopic.php?p=677132#p677132
- geoberni
- Minor Legend
- Posts: 3652
- Joined: Fri Aug 04, 2017 11:19 am
- Location: North Leicestershire
- MMOC Member: Yes
Re: Heater control tap - simple solution
Looks like our Moderator doesn't know all the Swearing settings, or else there's a problem with the boardsimmitc wrote: ↑Mon May 22, 2023 2:35 pm The cable operated ones, even "good" ones, have never been that great; so I think that this is a good alternative. The only downside is that both the original and new valves MY FAVOURITE CAR IS A DATSUN CHERRY off circulation to the rear of the head. The ideal is a diverter valve that passes hot water to either the heater or the return to the radiator. See viewtopic.php?p=677132#p677132
![Whatever :roll:](./images/smilies/icon_rolleyes.gif)
![:lol:](./images/smilies/icon_lol.gif)
![:lol:](./images/smilies/icon_lol.gif)
Basil the 1955 series II
![Image](https://image.ibb.co/hrLO0J/DSCF8095_F.jpg)
![Image](https://image.ibb.co/hrLO0J/DSCF8095_F.jpg)
- svenedin
- Minor Legend
- Posts: 1965
- Joined: Fri Aug 29, 2014 9:27 am
- Location: Surrey
- MMOC Member: Yes
Re: Heater control tap - simple solution
I think he made a typo of the word “shut”geoberni wrote: ↑Mon May 22, 2023 4:11 pmLooks like our Moderator doesn't know all the Swearing settings, or else there's a problem with the boardsimmitc wrote: ↑Mon May 22, 2023 2:35 pm The cable operated ones, even "good" ones, have never been that great; so I think that this is a good alternative. The only downside is that both the original and new valves MY FAVOURITE CAR IS A DATSUN CHERRY off circulation to the rear of the head. The ideal is a diverter valve that passes hot water to either the heater or the return to the radiator. See viewtopic.php?p=677132#p677132![]()
![]()
![]()
1969 1098cc Convertible “Xavier” which I have owned since 1989.
Stephen
Stephen
Re: Heater control tap - simple solution
Indeed, having the U and the I next to each other when using a small screen keyboard can be a bit of a problem
Be thankful we're not discussing a film such as "Hot Shots". ![:o](./images/smilies/icon_eek.gif)
I could edit the post, but hey, if leaving it as it is gives a laugh or two, then surely that makes the world a better place.
![Blushing :oops:](./images/smilies/icon_redface.gif)
![:o](./images/smilies/icon_eek.gif)
I could edit the post, but hey, if leaving it as it is gives a laugh or two, then surely that makes the world a better place.
-
- Minor Fan
- Posts: 254
- Joined: Tue Oct 26, 2010 9:01 pm
- MMOC Member: No
Re: Heater control tap - simple solution
I fitted a brass tap after going through several cable valves. I think this is a wonderful solution. You do not need to stop the car and pop the bonnet if it gets cold.
1969 Traveller in Almond green. Owned since 1979.
-
- Minor Legend
- Posts: 1383
- Joined: Tue Mar 26, 2013 8:20 pm
- Location: Chelmsford, essex
- MMOC Member: No
Re: Heater control tap - simple solution
When I had a Series 2 Landrover I went all sophisticated and had a heating gate valve under the dash inside the vehicle, worked a treat for years.
- geoberni
- Minor Legend
- Posts: 3652
- Joined: Fri Aug 04, 2017 11:19 am
- Location: North Leicestershire
- MMOC Member: Yes
Re: Heater control tap - simple solution
simmitc wrote: ↑Mon May 22, 2023 6:32 pm Indeed, having the U and the I next to each other when using a small screen keyboard can be a bit of a problemBe thankful we're not discussing a film such as "Hot Shots".
I could edit the post, but hey, if leaving it as it is gives a laugh or two, then surely that makes the world a better place.
![Good'un :tu1:](./images/smilies/Icon_thumbs_up.png)
![:lol:](./images/smilies/icon_lol.gif)
![:lol:](./images/smilies/icon_lol.gif)
Basil the 1955 series II
![Image](https://image.ibb.co/hrLO0J/DSCF8095_F.jpg)
![Image](https://image.ibb.co/hrLO0J/DSCF8095_F.jpg)
-
- Minor Addict
- Posts: 764
- Joined: Mon May 26, 2003 9:50 pm
- Location: S E Wales
- MMOC Member: Yes
Re: Heater control tap - simple solution
Thanks for your comments
I have to ask 'Why?' New heater tap was required and I thought this was a nice low-tech idea and no leaks so far! I must admit the jubilee clips look a bit cumbersome. I have still got the brass tap on the cylinder head due to the original valve not controlling the water flow
The push heater knob isn’t just on/off. I use it to regulate the water flow and hence the heat too. This can still be done
although controlling with the push control wasn't that precise!
I have to ask 'Why?' New heater tap was required and I thought this was a nice low-tech idea and no leaks so far! I must admit the jubilee clips look a bit cumbersome. I have still got the brass tap on the cylinder head due to the original valve not controlling the water flow
The push heater knob isn’t just on/off. I use it to regulate the water flow and hence the heat too. This can still be done
![Happy :D](./images/smilies/icon_biggrin.gif)