Morris Minor Owners Club

Hi guys I have a set of 15" minilite style alloy wheels made by JBW that I brought just over a year ago from a morris minor dealer and the chrome lip around the edge in places has started to go dull with wavy lines going through it. I did try and take some pictures but it doesn't show very well...

Your probably best not to disconnect the battery as we have had several cars at work get flat batterys being layed for a couple of months and have lost the codeing to the key and they have to be recoded by main dealer or some auto electricians can do it. Your probaly best to start it now and again t...

A few members have fitted Ford Ka seats as well. I can recommend the ka seats, there not to bad to fit they just need the feet drilling off and repositioning in a different order and the large one to be cut into two, also the rear ones fit good as well to match. https://fbcdn-sphotos-e-a.akamaihd.n...

cheers crazyChris thats the one i was looking for

They wont roy there atached to the heater slider, they help it smell a bit nicer and add a bit of colour

Hi
Does any body have a picture of a minor with a front splitter/spoiler fitted?, I remember seeing one but im not sure were, i think it had a place for the license plate in the middle and 2 spot lights moulded in the front of it, it looked quite smart

Thanks
Ben

Cheers, im surprised more people haven't done it

cheers guys, i forgot that the mounts were built onto the front plate

https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-prn2/t1/1463005_10201979993074887_640284281_n.jpg Heres what i did to the horn in my steering wheel, i removed the horn spring and connectors and soldered the wire onto one terminal on the push switch then put heat shrink over the top, then i bended...

I have managed to get a mini timing chain tensioner, cover and backplate. Is it posible just to change the backplate on my 1098 engine to the backplate from the mini engine to cator for the tensioner instead of drilling holes in the original back plate as mentioned in other posts. Also can i use the...

Hi
The clip on mirrors clip onto the edge of the qauter lights. Most pepole only have one low down on the drivers side, but i preffer two high up on both sides so i can see more




Hope this helps

Cheers, so just to confirm all 12 bushes on the rear suspension of the salon are all the same size?

Hi
are the there x2 different size bushes for the rear leaf springs a shackle?
if so which order do they go in?

Thanks
Ben

Hi guys I am thinking about renewing my under seal as the old stuff is flakeing off, I have a few questions that I cant find definitive answers too when removing the old underseal should I remove it compltley back to bare shinny metal ? (if there is any hiding underneath) also is it fine to paint th...

Just thought i would say i attended my first national rally today and i realy enjoyed it :D I would like to thank all the organisers and the volunters who gave up there time to make everyones time enjoyable. All the members we met were all very friendly and helpful pepole. It was organised brilliant...

I believe the vehicle has been off the road for a good number of years, so it will need an mot

Hi
does any one know if it makes a diference of what type of rubber spark plug caps i can buy for my car?

and does anyone know what the rubber caps on the ht lead that screws in to the dizzy is called and what gauge is the ht lead?

Thanks
Ben

We have had a tatty Minor sat at work in the compound for a good time now waiting for work to be done to get it throug an mot so the owner can swap the licence Plates off of it to another vehicle i have been told. The reg is 97TTA, iv been told this is a special reg with value does anyone have any i...

Hi and welcome im also a young member from Somerset and my cars also my daily drive

if you havent joined already join the young members facebook group as there all very helpful and friendly pepole

https://www.facebook.com/groups/MMOCYM/

sorted it out now turns out the old bulb holders crimps were to far back to make a conection with the new bulb