Morris Minor Owners Club

Years ago, in the days of four star, you could start a car, that had been stood for a while and it was fine (I never just left them for months on end anyway). Back in 2017, I tried to start my Midget 1500 after a biggish engine job and it just went futt futt futt and would not pick up. I pumped the ...

I decided to do my own, so fixed some bulb holders to a piece of wood. I seems to work well enough and is easy to fix. It's not likely that all the bulbs will go at once. The photo doesn't really do it justice; there is more light than it suggests. The wood is 2m long and the end bulbs six feet apar...

I decided to do my own, so fixed some bulb holders to a piece of wood. I seems to work well enough and is easy to fix. It's not likely that all the bulbs will go at once. The photo doesn't really do it justice; there is more light than it suggests. The wood is 2m long and the end bulbs six feet apar...

The Midget manifold comes out level and the end is angled at 20 degrees. The Mini carb face is tilted at 30 degrees BUT the inlet tracts slope upwards from the head. My exhaust manifold still stands a bit too proud but so I gather, the Maniflow LCB will clear their Mini inlet. I took some measuremen...

It's the inlet manifold that is meant for a Cooper S but it's made by Maniflow.

How on earth do they get the figures on page 70

Best if I attach my scribblings.......give everyone a laugh .

Also, a few pages further along, there are sums with dots between the numbers and I don't know what they represent?

It's all ready for loosening and lifting this weekend. I was thinking put a piece of 2 X 2, to support the gearbox and remove the mountings. Then support on a trolley jack (Remove the 2 X 2), which can roll forward as the engine is lifted and once sufficiently far, the gearbox will simply be raised ...

philthehill wrote: ↑Tue Apr 30, 2024 9:59 am If it wont fit get a bigger hammer

Just don't go beyond the elastic limit or it could break or lose interference .

Yes it's the numbers, which appear to be fed into the last equation on page 69. So far as I know, p, placed in front of the square bracket, means that the contents of the bracket are multiplied by p. Within the square bracket, the figures in the regular brackets are worked out , multiplied by 1 /E1 ...

I just can't make out where they got the figures from, to make the calculation .

I am trying to work out how the equation, at the bottom of page 69, becomes the solution on page 70. It is a long time since I did O level maths but I don't recall anything quite like this, so maybe this would be A level or perhaps higher again? As I read it, you have P X what is in the square brack...

Bring it back in fifty years.

Had a bit of spare time today, so disconnected the clutch slave cylinder and the prop shaft came out very easily (Easier than on a Midget), so I think that's the last thing to disconnect before the engine comes out.

I had a set for my MG Midget (Shorter) but replaced them with a set made by Quaife, that have lasted over thirty years and numerous hillclimb starts (Between 1992 & 1997). The Quaife ones had splines at both ends. I am looking into getting some for the Traveller but the issue could be that the d...

Seems a bit self defeating, having to make cars into tanks, in order to protect you from being hit by another tank. Lighter cars are surely easier to control. I remember my father made the point that when cars cocoon you, to disguise the impression of speed, it makes drivers less aware of what is ha...

Many thanks.

I am about to rectify the pig's ear Wares made of the five speed installation in my car, which mainly concern the clutch. However, whilst at it, shorter remotes are now available for the Ford box, plus drain plugs are now an option, so the gearbox is coming out too. I've not removed this type of box...

Just think of the Mini . Some of them are more like Maxi Plus and I recently looked up the weight of one of them. 26cwt or about the same as my grandfather's Riley RM . I don't take much notice of modern stuff but they don't seem that roomy, despite their bulk.

les wrote: ↑Mon Apr 08, 2024 2:23 pm I was like thinking, should I start my posts with———the word So ?

Yes, I've noticed that.

It's not fashionable to be normal or ordinary anymore; you have to be "Cool". You can be conceited and arrogant, so you as you are casual about it .