Morris Minor Owners Club

Payen? I bought one from Mini Spares and found it excellent. For the small bore engines they do this one https://www.minispares.com/product/Classic/Engine/Cylinder_heads/Gaskets/C-AEA647.aspx?100401&ReturnUrl=/search/classic/small%20bore%20head%20gasket.aspx|Back%20to%20search I do prefer the co...

Me too. It's taken a couple of minutes to open this thread and reply box. I'm on Windows 10 using Chrome. I having to log in each time I visit even though I've ticked the 'remember me' box.

Dark night, dodgy area, faulty door locks officer

I know, I'm embarrassed to admit it
One scrubber removed and it took all of five minutes - I had a tea break halfway through

I'll pull one out, that makes a total spend of 50p for the packing material.I already had the clamp and paint

Ditto. Here's one in the process of connecting a pressure gauge on my engine

I had a go at replacing the material in the crankcase 'chimney' I had a spare so it was dissected and the grotty mess scooped out. Although it was, mostly, intact it was solid with gunk https://i.imgur.com/1lyxYft.jpg After a clean and paint https://i.imgur.com/GqPpgUG.jpg £3 for six off Ebay, stain...

I believe the four door seats have rounded corners to allow easier passenger access but the two door seats are squared off to fit snug to the side of the car.

That looks great :tu1: I used a different approach and fitted LED units into the reflector holders, it meant drilling the pillars for the mounting stud and wiring though. That along with new conventional stop/tail bulbs, with the holders painted with a chrome spray, made quite a difference. https://...

https://www.autocar.co.uk/car-news/new- ... rris-minor

I'm glad it wasn't

Does this help

I fitted these Ebay panels a couple of years ago https://i.imgur.com/HKd0nNu.jpg And these strip LEDs to the workshop end https://i.imgur.com/G6BeajF.jpg So far no problems and they give off a nice even light. I'll be fitting a couple more of the panels on the other side when the Commer is finished ...

There are a couple of different ratio servos around, usually 1.7 and 1.9. It could be that the servo you have is too powerful for the weight of the car.

I fitted a 12G940 head off a 1275 Mini to my standard 1098 block. There can be exhaust valve to block face clearance issues which can be sorted in a few ways:- recessing the valves, pocketing the block or, as in my case, skimming the valve faces ( I was lucky as the head hadn't been slimmed so very ...

I've done the same on my traveller and the recently departed Mini and both worked fine with no issues since.

The knew how to make 'em back then

I recently insured a 1885 Citroen BX 19 GT, it was cheaper to insure than the 1991 Mini Cooper it replaced