Morris Minor Owners Club

I worked out the top one a bit like my zr van removing a driveshaft, the bottom one I've worked but a bit more involved
The seals I got at beaulieu last week from mmoc Dorset already , the cars only used in dry weathers plus undercover the rest of the time

I want to replace the rubbers that cover the trunnions as they have perrsished, just seeing do you have to remove everything to do this

Do u know the CFL rate of the unit as it's not on the website.
I bought an upright scheppach compressor and the flows too low for tools being used continuously

Looks like a good product , I got a rust converter from Esm I think it dimitron of something it's useless after removing surface rust from rear axle a month later bits are coming through anti stone chip paint I applied

Just looking into painting under neath the car , I was looking at epoxy mastic it looks a nice finish has anyone tried it?

It was after having a belt change plus service on one of our Astra vans in the gillingham area Kent .
We need a courtesy vehicle can anyone recommend a garage it's a Astra 1.7 08 diesel so
Thanks

I bought the halfords 3 layer cover, so far so good just have to watch sharp edges.
I looked at the storm force ones and the negative comments put me off

I've tried that it doesnothold it, it did not want to put too much pressure on it when putting in though

I ve got the compressor out for the first time the connectors do not appear to be right, see pic , is there another one I need?[frame][/frame]

I was a bridges yesterday the Morris is still there, it's got signs of rust in the usual places, plus it's been out in the weather for the last month.
The interior is clean though

Thanks for the answers , I got the upright scheppach hc50v and bought theses at screwfix 50 lr 180 psi http://www.screwfix.com/p/erbauer-air-tool-kit-43-piece-set/5671h http://www.screwfix.com/p/air-tool-spray-kit-5-pieces/1710h So looks like I just need the hose and separator there are adapt ers in...

I was lucking enough to get an air compressor for christmas :D , looking at the compressor you need an airline plus there is a mention of various adapt ers on screwfix website. I am just seeing what I require to get going, I got 2 kits today one had various male adapt ers , just looking for a bit of...

Bridges breakers have a saloon for 1600 salvage at the moment, it has front end damage its a bit expensive for its condition though
http://www.gwbridges.co.uk/55215.html

I have not looked at it since yesterday so will try the tests suggest , I will not be until the weekend now

The bump stop is missing , I tried to replace yesterday but on of the u bolts is seized. I think the previous owner who had some welding done where the other side of the bolt maybe , must have removed it as the area were the bolt would come out is new metal, possibly. I was looking at getting refurb...

I just took each cap off so it was nowhere near the spark plug anode, plus a spark was present on plug when earthed to the block

I removed other leads and it engine stops , I checked the compression by turning over the engine and seeing if there pressure from the plug hole. It seemed equal to other cylinders To check the non firing cylinder while the engine was running it removed each lead and only one did not alter the runni...

Just going through jobs to do on my car one cylinder is not firing there is a spark , and there is compression as I ve checked this also no choke is required from cold?

[frame][/frame]

[frame][/frame]