Search found 3574 matches
- Wed Apr 24, 2024 11:44 am
- Forum: Electrical
- Topic: Multimeter recommendation
- Replies: 5
- Views: 138
Re: Multimeter recommendation
The analogue one shown should cover all your everyday needs. Some people have difficulty reading/understanding the multitude of scales shown on the face of an analogue meter.... The fuse in most digi multi meters (DMM) will only protect the low current circuits (often 200mA or 400mA range) the high...
- Tue Apr 23, 2024 4:19 pm
- Forum: Electrical
- Topic: Multimeter recommendation
- Replies: 5
- Views: 138
Re: Multimeter recommendation
£16, that's a high starting point.... I totally understand your confusion as to the wide range. There's obviously the bottom end of the market, shall we say under £8 on the ebay price scale.... At the bottom end of the price range, it's probably not got a replaceable fuse inside it and the quality o...
Re: rear seat
I understand your need for the question, it's not an obvious thing when researching it.
So you have a 4 dr, just look at some images of a 2 Dr rear for comparison. As panky has surmised, you'll see the 2Dr is a squared off fit to the side panels.
- Fri Apr 19, 2024 3:00 pm
- Forum: Off-Topic
- Topic: calling the police
- Replies: 96
- Views: 38144
Re: calling the police
Let’s also not forget the fires caused by the batteries exploding. Numerous house fires and a few weeks ago an E-scooter caught fire on the platform at Epsom station. Had that been on a packed train it would have been disastrous. Stephen A lot of the problem with the privately purchased ones is the...
- Fri Apr 19, 2024 10:55 am
- Forum: Mechanical
- Topic: Tappet chest cover - confusion
- Replies: 8
- Views: 157
Re: Tappet chest cover - confusion
According to the Parts List, it wasn't a PCV, it was a VBC.... Valve - breather control ...
For some reason, the pdf I have of the AKD 3541 doesn't have the illustration to go with the list, I guess that page had been lost, but the parts are listed.....
For some reason, the pdf I have of the AKD 3541 doesn't have the illustration to go with the list, I guess that page had been lost, but the parts are listed.....
- Fri Apr 19, 2024 9:38 am
- Forum: Off-Topic
- Topic: calling the police
- Replies: 96
- Views: 38144
Re: calling the police
In the East Midlands this morning, it was announced that 'Trial Scooters' are coming back to Nottingham after the previous Scooter provider suddenly closed down in December. The Scooters will come from the same company that are currently providing the e-bikes in the city. https://www.bbc.co.uk/news/...
- Fri Apr 19, 2024 8:51 am
- Forum: General Discussion
- Topic: Vacuum Advance.
- Replies: 17
- Views: 585
Re: Vacuum Advance.
Back in 2018 when I was having 'dead ignition' issues, although that was eventually traced to an intermittent Coil, I found that the Diaphragm on the Dissy was leaking. I ordered one from the ebay account of a reputable Ign parts supplier. The hole/thread in the Adjuster was crooked; I had to swap t...
- Wed Apr 17, 2024 4:32 pm
- Forum: General Discussion
- Topic: Mirrors
- Replies: 13
- Views: 330
Re: Mirrors
If I remember, it was illegal to park on a road without lights then. These overcame that requirement and were perfectly legal. I believe parking lights were required on unlit Road. These days we don't realise, or remember if old enough, what road conditions were like 60+ years ago. The National Spe...
Re: Wipers
You've got a '68, try doing the rain in a Split Screen... :lol: But seriously I can't imagine fitting a 2 speed is difficult on a 1000 at least the motor is easy to get at. Of course, what the relative speeds are, and whether it's actually a big improvement or not, is a good question hopefully someo...
- Mon Apr 15, 2024 3:29 pm
- Forum: Series MM Register
- Topic: Windscreen Sealing
- Replies: 4
- Views: 201
Re: Windscreen Sealing
I used a tube of MANNOL WINDSCREEN SEALANT, currently about £12 for a 310ml tube on ebay. I had a leak somewhere along the edge of my '55 windscreen, leaving a puddle on the passenger's rubber floor mat. I put a bead of this all around it and no problems since. I just looked up when I brought it and...
- Mon Apr 15, 2024 11:28 am
- Forum: General Discussion
- Topic: Mirrors
- Replies: 13
- Views: 330
Re: Mirrors
My Clamp on, from ESM, is fitted as shown.
(Photo originally taken to show the Parking Light I'd obtained from ebay)
You can make out the scuff marks where a PO had fitted one, but it wasn't fitted that well and it was too high for my liking, obstructing my view.
(Photo originally taken to show the Parking Light I'd obtained from ebay)
You can make out the scuff marks where a PO had fitted one, but it wasn't fitted that well and it was too high for my liking, obstructing my view.
- Mon Apr 15, 2024 11:16 am
- Forum: Mechanical
- Topic: Spark plugs
- Replies: 13
- Views: 324
Re: Spark plugs
I noticed as oil went in to the spark plug there appeared to be an air leak at the plug.Have I got the wrong plugs I was running my car's engine after an oil change, having spilt a dribble of oil that went around one of the plugs. I noticed a miniscule little bubble appearing, presumably on every c...
- Sat Apr 13, 2024 2:28 pm
- Forum: General Discussion
- Topic: New Tank
- Replies: 4
- Views: 161
Re: New Tank
Just make sure that there is good metal to metal contact between Tank and Body Shell somewhere, DON'T just rely on the screws to perform that function.
Otherwise you'll be wondering why the Fuel Gauge isn't working, or it's reading wrongly.....
Otherwise you'll be wondering why the Fuel Gauge isn't working, or it's reading wrongly.....
- Wed Apr 10, 2024 8:33 pm
- Forum: Mechanical
- Topic: Brake bleed nipples and union screws
- Replies: 9
- Views: 302
Re: Brake bleed nipples and union screws
Unlike you I would be most concerned if the connections were flush. How can you be certain they have correctly screwed down if they are flush? I had a 37 year career in aircraft engineering and I would never expect to see a flush pipe Union in the way you speak of.... :-? I can't think of any brakes...
- Mon Apr 08, 2024 5:52 pm
- Forum: General Discussion
- Topic: Spotted today.
- Replies: 2459
- Views: 742850
Re: Spotted today.
I was driving just out of Chesham going towards Great Missenden this afternoon a road I've used loads of times even on Saturday when I just happened to look left and there was three Morris Minor saloons in a field and looked as if they have been there a while. There one of two other cars one was a ...
- Mon Apr 08, 2024 4:28 pm
- Forum: Mechanical
- Topic: Manifold Work Tips?
- Replies: 7
- Views: 248
Re: Manifold Work Tips?
Removing the Carburettor, and refitting it, is quite easy, I would say the fiddliest bit is reconnecting the Throttle and Choke Cables correctly. Especially the bit about twisting the Choke Cable, or 'mixture control' as the Workshop Manual calls it (see fig B18 in the Manual). Perhaps 'famous last ...
- Mon Apr 08, 2024 3:31 pm
- Forum: Electrical
- Topic: Over-Eager Wipers on Start
- Replies: 9
- Views: 352
Re: Over-Eager Wipers on Start
That's pretty strange, all I can imagine is a problem with the 'Self Park' aspect in the Wiper motor. The Wipers are powered as soon as you turn the key on, when you operate the switch, you're actually providing the Earth to the motor. So there must be a stray earth somehow being applied to the motor.
- Mon Apr 08, 2024 3:28 pm
- Forum: Restoration Projects
- Topic: Replacement Steering Wheel with indicator Arm
- Replies: 10
- Views: 297
- Mon Apr 08, 2024 12:19 pm
- Forum: Restoration Projects
- Topic: Replacement Steering Wheel with indicator Arm
- Replies: 10
- Views: 297
Re: Replacement Steering Wheel with indicator Arm
According to the Workshop Manual, the actual Morris one, not the Haynes, .... Section JJ for the 1000 model, it needs to be the complete assembly.
- Mon Apr 08, 2024 10:09 am
- Forum: Mechanical
- Topic: 7" brakes worth saving?
- Replies: 3
- Views: 124
Re: 7" brakes worth saving?
Well, ESM stocks 'reconditioned' 7" front back plates at £35 each, so I would hang onto them a little while yet, perhaps a little bit of cleaning up and painting might be worth it. New pattern 7" drums are readily available as they're the same as the rear. Now whether an original in good c...