Search found 87 matches
- Thu Feb 24, 2022 9:03 am
- Forum: Electrical
- Topic: Hot switch
- Replies: 9
- Views: 864
Re: Hot switch
End of the day, it was a simple issue. I tried to open the switch and replace, The connections at the back was very loose. Really loose until i dint require a screw driver to loosen the cable end. To avoid further issue, i replace it with new switch. Save my cost from buying relays.. Thanks for all ...
- Fri Feb 04, 2022 6:22 pm
- Forum: Electrical
- Topic: Hot switch
- Replies: 9
- Views: 864
Re: Hot switch
Hi Exactly my concern regarding the fuse. Why its for sidelamp/panel lights only. My Loom is new, fixed during restoration about a year ago. I spoke to an another chap, he told me those days parts are HIGH quality, nowadays the quality is a Big question mark. He advised me to get a old switch from s...
- Mon Jan 31, 2022 4:15 pm
- Forum: Electrical
- Topic: Hot switch
- Replies: 9
- Views: 864
Re: Hot switch
Thanks for the answers, My first light switch was from CW, current one is from ESM. I believe both from the same supplier. Any link for GOOD quality switch?? The switch gets overheated, even after 20-15mins of usage.. Some told me to add a headlight relay and some told me to add a FUSE to protect th...
- Sun Jan 30, 2022 3:25 pm
- Forum: Electrical
- Topic: Hot switch
- Replies: 9
- Views: 864
Hot switch
Hello , hope i can find a solution here. i am experiencing hot switch every time i operate the headlamps. First time when the switch gave away, i changed it to a new switch. It happened again recently. I doubt its the switch anymore. Mine is 1964 push pull switch. Im using new loom and im following ...
- Thu Sep 02, 2021 12:12 pm
- Forum: Bodywork
- Topic: Engine mounting height
- Replies: 17
- Views: 2752
Re: Engine mounting height
Alright, managed to sort this issue recently after the long lockdown, Well, engine / gearbox mounting and bracket all in order as per the diagram. Ended up welded a 2mm plate under the engine mounting bracket. Now the exhaust pipe and the oil tank have some clearance from the body. Problemo solved :...
- Fri May 28, 2021 2:34 am
- Forum: Bodywork
- Topic: Engine mounting height
- Replies: 17
- Views: 2752
Re: Engine mounting height
Im malaysian. I have posted the same question in FB. Some advised me to try swap the towers, it may solve my problem it seems. I thought they differ in height. In this forum i learnt that its not the height, but its about the for and aft angle. yes, i do agree with you. My engine is out of its posit...
- Thu May 27, 2021 4:39 pm
- Forum: Bodywork
- Topic: Engine mounting height
- Replies: 17
- Views: 2752
Re: Engine mounting height
Actually it was a question asking if its same height. Looking at Parts manual and moss parts list, it looks like one bigger and smaller, but cannot judge, it could be photo illusion. Some claim swapping its position solves the issue. Some say doesn’t make any difference. I think i have to find myself.
- Thu May 27, 2021 12:50 pm
- Forum: Bodywork
- Topic: Engine mounting height
- Replies: 17
- Views: 2752
Re: Engine mounting height
Hi
I only bought the eng and gearbox mounting from ESM, not the tower. Then i realize its touching the body.
I guess i have to slacken all the mounting, steady bar and the steady cable (gearbox side) , and re-align.. may i know is there any right sequence to do that?? Share some tips. Thanks..
I only bought the eng and gearbox mounting from ESM, not the tower. Then i realize its touching the body.
I guess i have to slacken all the mounting, steady bar and the steady cable (gearbox side) , and re-align.. may i know is there any right sequence to do that?? Share some tips. Thanks..
- Thu May 27, 2021 10:32 am
- Forum: Bodywork
- Topic: Engine mounting height
- Replies: 17
- Views: 2752
Re: Engine mounting height
Sorry phil. Dont have much photo's of the issue. I will try swap the mounting tower and will see from there. Thanks
- Thu May 27, 2021 9:33 am
- Forum: Bodywork
- Topic: Engine mounting height
- Replies: 17
- Views: 2752
Re: Engine mounting height
Maybe the angle of the mounting is different. I saw the part number is different and suppliers selling as LEFT and RIGHT separately. I assume there must be some kind difference. I will try to swap right to left then see if i can swap the issue.
- Wed May 26, 2021 6:56 pm
- Forum: Bodywork
- Topic: Engine mounting height
- Replies: 17
- Views: 2752
Re: Engine mounting height
Oil filter is original. The two towers are actually different in size right? One taller one shorter.
- Wed May 26, 2021 5:42 pm
- Forum: Bodywork
- Topic: Engine mounting height
- Replies: 17
- Views: 2752
Re: Engine mounting height
Did you fit a complete set of engine/gearbox mounts? The sump (oil tank) should not get anywhere close to the tie plate. Did you put the engine/gearbox mounts the right way round? Did you put the engine mount towers the right way round? A photo of the problem(s) would be helpful. My apologies. Its ...
- Wed May 26, 2021 4:30 pm
- Forum: Bodywork
- Topic: Engine mounting height
- Replies: 17
- Views: 2752
Engine mounting height
Hi, Recently i felt the vibration every time i start the car. I bought new engine mounting from ESM. True enough,old mounting was bad. The new ones are softer, no more vibration. But, now i realize my oil filter touching the tie plate, the exhaust pipe touching the body. Its so obvious. Anybody expe...
- Sun Mar 28, 2021 5:15 pm
- Forum: Mechanical
- Topic: Fuel pump outlet
- Replies: 5
- Views: 498
Fuel pump outlet
Hello,
I have a little issue with the fuel pump outlet. It keeps coming out. Does anybody faced this issue before?
Im using AUA66 push on type. Is there any other alternative solution for this issue?
Please share the link if its been discussed before.
Regards
Vik
I have a little issue with the fuel pump outlet. It keeps coming out. Does anybody faced this issue before?
Im using AUA66 push on type. Is there any other alternative solution for this issue?
Please share the link if its been discussed before.
Regards
Vik
- Sat Jan 30, 2021 1:04 pm
- Forum: Electrical
- Topic: Sealed beam
- Replies: 2
- Views: 1307
Re: Sealed beam
Thanks for the photo
It is helpful
It is helpful
- Fri Jan 29, 2021 9:43 am
- Forum: Electrical
- Topic: Sealed beam
- Replies: 2
- Views: 1307
Sealed beam
Hope i can learn something about sealed beam headlight. There are many types of sealed beam headlights. How to identify which is genuine Lucas or which is which brand. While scroll through online, i found various codes 7002/7603/7014/7237 even E11, E4, some written Left traffic some not, some writte...
- Fri Jan 29, 2021 9:36 am
- Forum: Mechanical
- Topic: How to differentiate between the springs
- Replies: 2
- Views: 352
Re: How to differentiate between the springs
Thanks for the good info.
Additional Infos from another group, just for sharing,
Brake return spring - the hooks are set at 90 degrees to each other, not parallel.. c
Additional Infos from another group, just for sharing,
Brake return spring - the hooks are set at 90 degrees to each other, not parallel.. c
- Thu Jan 28, 2021 11:13 am
- Forum: Mechanical
- Topic: How to differentiate between the springs
- Replies: 2
- Views: 352
How to differentiate between the springs
Is there any ways to differentiate the three springs Throttle, brake and clutch spring?.
The hook, length or the tension ??
The hook, length or the tension ??
- Wed Jan 20, 2021 11:57 am
- Forum: Other
- Topic: Which one is original
- Replies: 14
- Views: 3347
Re: Which one is original
Thought of sharing my research. Both are original by BMC and both available in Morris parts manual list. One is 11H1051 and another is 11H1686. Some used in MG and other BMC make. Apparently its depends which factory the car was made. The flat was used in Nuffield it seems. Again, not much genuine s...
- Sat Jan 16, 2021 1:36 pm
- Forum: Other
- Topic: Which one is original
- Replies: 14
- Views: 3347
Re: Which one is original
But the other one looks much better quality! I keep my ( upgraded) jack and tools in the original thin PVC bag issued by BMC in 1965 and never cease to be amazed by its flimsiness. Originality is only for shows. Make it all as safe and practical as possible and that includes tools. I carry a small ...