Morris Minor Owners Club

Welding has been done on n/s/r inner wing and has also been painted in red oxide then spray on stone chip[frame] http://mmoc.org.uk/mbimage.php?src=1349036147_9667 [/frame] Here is a picture of the inside[frame] http://mmoc.org.uk/mbimage.php?src=1349036228_9667 [/frame] Here is a photo of the car[f...

i took of the sill covers after i bought it and it has had new inner and outer sills and boxing plates on both sides the crossmember and chassis legs are all good but it needs both front inner wings repairing around by the bumer irons and 2 front floors and 1 back floor and thats all i can see that ...

This is my 1967 morris minor that i bought last thursday (20/09/2012) for the sum of £500.00 it has 10 months tax and mot but dont ask me how it got through a mot i bought this to use daily to save my 1966 morris minor so i can just use that for shows.[frame] http://mmoc.org.uk/mbimage.php?src=13484...

hi all i wondered what speedo cable do i need for a ford 1300cc crossflow gearbox to a minor speedo

cheers josh

i just wanted the switch on the gearbox so it would light up as soon as i go in reverse

hi all i have seen a reversing light swith to go on my 1098cc gearbox http://www.ebay.co.uk/itm/lucas-SMB462- ... 45fec2d368 so how do i go about wiring it up

cheers josh

the neighbour come up with a sugestion which was get a pick up build my own body and put a ram on my body and have it as a tipper dont know if it would work just for tipping up soil or something

cheers josh

hi all i am thinking about doing landscape gardening and tree surgery i wondered what would be best for the job a morris minor van or a pick up

cheers josh

ive had people talking to me about my projet when they are passing by and they have told me to keep it original so i might just do that i have welded 1/2 an inner wing on the driver side front today[frame] http://mmoc.org.uk/mbimage.php?src=1321827803_9667 [/frame] i decided to clean the 948cc gearb...

still too this day i keep looking and thinking about it

i was just testing it in rattle cans so then i bought it in celly paint to spray it

passengers front floor painted in red oxide[frame] http://mmoc.org.uk/mbimage.php?src=1318714961_9667 [/frame] just testing the colour and i am happy with it so this is the colour grey that i have bought to spray the car it is ford polar grey ready for when all the work is finished[frame] http://mmo...

cills welded in [frame][/frame]

[quoteThat roll-over jig looks a bit scary!! ][/quote]

i dont think health a & safety would approve

all the rot is cut out of it and it thick steel tbh as its thicker than the new floors the floor dosent flex or anything

I cut out the floor last thursday[frame] http://mmoc.org.uk/mbimage.php?src=1318356831_9667 [/frame] I welded a bit of the inner wing up on thursday[frame] http://mmoc.org.uk/mbimage.php?src=1318356907_9667 [/frame] Tonight i have welded in the floor[frame] http://mmoc.org.uk/mbimage.php?src=1318356...

i have 2 blades fitted on mine

ok so i need that back plate,hydraulic clutch kit the hydraulic clutch on esm is one for a 1098cc gearbox is that the 1 i need also which flywheel and clutch do you think i should use

cheers josh

is this what i need http://morrisminorspares.co.uk/shop/product_info.php?products_id=1414&osCsid=ecb32406ad8ddd80462233de655c3125 http://morrisminorspares.co.uk/shop/product_info.php?products_id=1413&osCsid=5f769a1ccd3aeb22778d1505c0598761 what i was going to do was stick a 1098cc box on fir...

i have a 1380cc marina engine and i wondered what bits do i need to convert to fit a ford sierra 5 speed gearbox also what diff would be best to use maybe a 4.5 or 4.22,3.9,3.7 suggestions welcome

cheers josh