Search found 805 matches

by Mogwai
Sun May 29, 2011 6:54 pm
Forum: Mechanical
Topic: Rear axle seal track repair kits?
Replies: 5
Views: 1042

Re: Rear axle seal track repair kits?

Did mine recently its a speedi sleeve part no CR99174
I got mine from these people as they have a branch close to me http://www.brt-bearings.com/1024x768/map.html but any local bearing supplier should be able to get you one.
by Mogwai
Fri Apr 22, 2011 7:22 pm
Forum: Electrical
Topic: car battery condition advice
Replies: 9
Views: 1545

Re: car battery condition advice

Open Circuit--------Approximate-------Average Cell Battery Voltage----State-of-charge---Specific Gravity ------12.65+----------------100%--------------1.265+ ------12.45------------------75%---------------1.225 ------12.24------------------50%---------------1.190 ------12.06------------------25%----...
by Mogwai
Fri Apr 22, 2011 7:05 pm
Forum: Mechanical
Topic: Missing & Stalling
Replies: 5
Views: 993

Re: Missing & Stalling

That didn't last very long :-?
Didn't you put a new one in last month
by Mogwai
Thu Apr 07, 2011 7:14 pm
Forum: Off-Topic
Topic: SADMOG (Sowf'ampton taawn)
Replies: 2741
Views: 383908

Re: SADMOG (Sowf'ampton taawn)

so Ship then ?
by Mogwai
Thu Apr 07, 2011 6:47 pm
Forum: Off-Topic
Topic: SADMOG (Sowf'ampton taawn)
Replies: 2741
Views: 383908

Re: SADMOG (Sowf'ampton taawn)

as its a nice evening is anyone up for something over this way. Ship Inn Langstone maybe ?
by Mogwai
Wed Apr 06, 2011 9:31 pm
Forum: Off-Topic
Topic: SADMOG (Sowf'ampton taawn)
Replies: 2741
Views: 383908

Re: SADMOG (Sowf'ampton taawn)

anyone about tomorrow ?
by Mogwai
Wed Apr 06, 2011 6:54 pm
Forum: Mechanical
Topic: ARP con rod bolts
Replies: 7
Views: 840

Re: ARP con rod bolts

I've found swiftune prices good for ARP bolts/studs etc
http://www.swiftune.com/Product/410/arp ... t-set.aspx
by Mogwai
Tue Apr 05, 2011 11:22 pm
Forum: Custom & Modified Register
Topic: fitting a ford z-tech in a morris
Replies: 64
Views: 18331

Re: fitting a ford z-tech in a morris

Would be a good idea to speak to JLH about this conversion

http://www.jlhmorrisminors.co.uk/
by Mogwai
Mon Mar 28, 2011 10:44 pm
Forum: Mechanical
Topic: Ominous axle knocks.....
Replies: 16
Views: 1314

Re: Ominous axle knocks.....

down the page are the Midget ones (same thing just shorter)
http://www.petermayengineering.co.uk/sp ... oducts.htm
by Mogwai
Mon Mar 21, 2011 9:03 pm
Forum: Custom & Modified Register
Topic: mgB caliper on marina hub
Replies: 7
Views: 3326

Re: mgB caliper on marina hub

This is something Ive been considering as the marina calipers on mine will be needing an overhaul sometime in the near future & whether to bother or not.
keep us posted on your progress
by Mogwai
Thu Mar 17, 2011 7:20 pm
Forum: Off-Topic
Topic: SADMOG (Sowf'ampton taawn)
Replies: 2741
Views: 383908

Re: SADMOG (Sowf'ampton taawn)

Ok see you there
by Mogwai
Thu Mar 17, 2011 6:46 pm
Forum: Off-Topic
Topic: SADMOG (Sowf'ampton taawn)
Replies: 2741
Views: 383908

Re: SADMOG (Sowf'ampton taawn)

I'm about
by Mogwai
Sun Mar 13, 2011 11:10 pm
Forum: Mechanical
Topic: Ominous axle knocks.....
Replies: 16
Views: 1314

Re: Ominous axle knocks.....

If that nut has come loose you will need a new collapsible spacer to reset bearing preload . don't just gun it up as it will overload the bearings
by Mogwai
Sat Mar 12, 2011 10:08 pm
Forum: Custom & Modified Register
Topic: Ram Pipe Info
Replies: 17
Views: 4181

Re: Ram Pipe Info

was only a few horses in reality but it did smooth out a power dip it had at lower rpm
It will likely have an effect on the fuelling so the needle may need changing. mine is a custom one now.
by Mogwai
Sat Mar 12, 2011 8:56 pm
Forum: Custom & Modified Register
Topic: Ram Pipe Info
Replies: 17
Views: 4181

Re: Ram Pipe Info

I made up my own rampipe. You can get bare spinning's from ITG & I welded one to a baseplate I made. tried with and without last time it was on a rolling road & there was a notable difference to the power curve
by Mogwai
Sat Feb 26, 2011 10:48 am
Forum: Mechanical
Topic: identifaction ital A or ital A+
Replies: 13
Views: 1700

Re: identifaction ital A or ital A+

& the charging system mountings will be spaced closer for an alternator rather than a dynamo. IIRC Marina A series mountings were spaced for an Alternator. I didn't word that very well :-? I meant the drilling's in the casting are narrower rather than the brackets. This forced my hand into using an...
by Mogwai
Sat Feb 26, 2011 10:38 am
Forum: Custom & Modified Register
Topic: HIF44 Choke operation
Replies: 7
Views: 2749

Re: HIF44 Choke operation

Choke on a hif is separate from the main jet, when operated the extra fuel is drawn up through a separate fuel circuit in the choke mechanism . the snail cam is just to open the throttle slightly to bring up the idle speed
by Mogwai
Thu Feb 24, 2011 10:38 pm
Forum: Mechanical
Topic: identifaction ital A or ital A+
Replies: 13
Views: 1700

Re: identifaction ital A or ital A+

The A+ has a ribbed block, the later distributor with a fork type clamp & the charging system mountings will be spaced closer for an alternator rather than a dynamo.
by Mogwai
Sat Feb 19, 2011 5:53 pm
Forum: Mechanical
Topic: Running as rough as a badgers behind
Replies: 17
Views: 1101

Re: Running as rough as a badgers behind

And it ran even better when we remembered to put the rotor back in :roll: :lol:
by Mogwai
Fri Feb 18, 2011 11:32 pm
Forum: Off-Topic
Topic: non morris bodge ideas.
Replies: 10
Views: 796

Re: non morris bodge ideas.

Matt wrote:You make it sound like you dont go to work very often! :lol:

I wish :lol: