Morris Minor Owners Club

how much oil do they take out of interest?
Cheers,
Tom

Wow thank you for the heads up re the thread tap very good to know!!

And thank you all for such comprehensive answers MOST appreciated!!

Thank you all for the replies! most appreciated! yes am aware! my problem is i have a 5sp box and nissan motor and the stock diff gives me high revs and mild speeds so just trying to correct that.. the previous owner did so using 195 tyres whereas I've since gone back to 175's with regards to the se...

Hi I have been given a 3.9 diff out of a midget.. just wondering is there anything I'll need to swap beside the diff when fitting? i.e. axels mounting the tailshaft etc?

Cheers,
Tom

What do you mean by bmc1800? Is that an Austin 1800?

I've seen some in mgbs but finding them is the problem!

were they for a moggie? or featured in another bmc car? I'm basically looking to find some here in Aus!

Hi just wondering if any of the bmc cars came out with the low-back seats like in a standard mog but ones that recline?

I was looking for some new front seats and my wife likes taking a nap as we cruise down the highway!

darn so fabric that's 137cm isn't going to cut it?

hmm I'll see if I can track it down in a 150cm wide bolt

Wow thank you guys I found a marine vinyl perfect match to the tartan I'll be using for highlights

Hi i was just wondering if anyone knew how much fabric was required to retrim the front and rear seats of a 4 door mog?

Thanks so much,
Tom

Hi all, I took old and new trunnions and put them together.. The trunnions I bought from Bullmotif (same as esm model I asked both) are 6cm in height (the metal casing that is) the ones on the car are made by a company called Allena and they are 6.5 cm long.. I have no idea why that would be the cas...

Hi guys I've split my fuse setup into 2 small fuse boxes one for battery fed stuff and one for the switched circuits.. Just wondering I have a 20a fuse in the battery box which has the feed to the ign switch from there it comes out the other side to the new ign switched box currently have 12ga wire ...

Hi all installing a new thermo fan I have the wiring diagram for installing it to work off a standard temp sensor with relay but I was wondering how would I wire in an override switch so if something stuffed up I could just turn it on?

Cheers
Tom

Because I've had electrical issues with the car.. it was sputtering up through the rev range due to electrical issues... the ign switch was burnt out and there was a dodgy kill switch put in by the previous owner.. so I thought I'd take the opportunity to upgrade my wiring do some safe things.. like...

hahaha what the heck is that picture!

Thanks for clarifying Alec..
most appreciated!

Hi Guys, 1. Just rewiring my fuse setup.. just wondering what ga wire you'd suggest for the primary battery feed to my new fuse box? 2. Also just wondering what amp fuse I'd need for the interior light.. and can anyone tell me which of the 2 purple wires it is? the thick or thin? 3. There are 2 gree...

Thanks for the reply guys!
yes I was thinking of getting one of those din mounting kits but was trying to pick the right one!

Hi I was just wondering if anyone had any tips on how to mount a stereo inside your glovebox? I was hoping to put mine in there and was wondering what approach people had taken i.e. wood panel screwed in somehow? where are the screws mounted etc..

any photos would be fantastic!

Cheers,
Tom

Hi i was just wondering if you guys had used specific portal software for the front page of mmoc or if that was actually hardcoded stuff?

Cheers,
Tom