how much oil do they take out of interest?
Cheers,
Tom
Search found 124 matches
- Mon Dec 05, 2011 10:25 pm
- Forum: Mechanical
- Topic: Fitting 3.9 diff
- Replies: 33
- Views: 10811
- Mon Dec 05, 2011 7:59 pm
- Forum: Mechanical
- Topic: Fitting 3.9 diff
- Replies: 33
- Views: 10811
Re: Fitting 3.9 diff
Wow thank you for the heads up re the thread tap very good to know!!
And thank you all for such comprehensive answers MOST appreciated!!
And thank you all for such comprehensive answers MOST appreciated!!
- Mon Dec 05, 2011 12:52 pm
- Forum: Mechanical
- Topic: Fitting 3.9 diff
- Replies: 33
- Views: 10811
Re: Fitting 3.9 diff
Thank you all for the replies! most appreciated! yes am aware! my problem is i have a 5sp box and nissan motor and the stock diff gives me high revs and mild speeds so just trying to correct that.. the previous owner did so using 195 tyres whereas I've since gone back to 175's with regards to the se...
- Mon Dec 05, 2011 11:44 am
- Forum: Mechanical
- Topic: Fitting 3.9 diff
- Replies: 33
- Views: 10811
Fitting 3.9 diff
Hi I have been given a 3.9 diff out of a midget.. just wondering is there anything I'll need to swap beside the diff when fitting? i.e. axels mounting the tailshaft etc?
Cheers,
Tom
Cheers,
Tom
- Sun Dec 04, 2011 8:11 pm
- Forum: General Discussion
- Topic: Original Style Seats That Recline?
- Replies: 11
- Views: 1834
Re: Original Style Seats That Recline?
What do you mean by bmc1800? Is that an Austin 1800?
I've seen some in mgbs but finding them is the problem!
I've seen some in mgbs but finding them is the problem!
- Sun Dec 04, 2011 10:54 am
- Forum: General Discussion
- Topic: Original Style Seats That Recline?
- Replies: 11
- Views: 1834
Re: Original Style Seats That Recline?
were they for a moggie? or featured in another bmc car? I'm basically looking to find some here in Aus!
- Sun Dec 04, 2011 5:05 am
- Forum: General Discussion
- Topic: Original Style Seats That Recline?
- Replies: 11
- Views: 1834
Original Style Seats That Recline?
Hi just wondering if any of the bmc cars came out with the low-back seats like in a standard mog but ones that recline?
I was looking for some new front seats and my wife likes taking a nap as we cruise down the highway!
I was looking for some new front seats and my wife likes taking a nap as we cruise down the highway!
- Thu Nov 24, 2011 9:53 pm
- Forum: Other
- Topic: amount of fabric required for seat re-trim?
- Replies: 6
- Views: 1290
Re: amount of fabric required for seat re-trim?
darn so fabric that's 137cm isn't going to cut it?
hmm I'll see if I can track it down in a 150cm wide bolt
hmm I'll see if I can track it down in a 150cm wide bolt
- Thu Nov 24, 2011 10:21 am
- Forum: Other
- Topic: amount of fabric required for seat re-trim?
- Replies: 6
- Views: 1290
Re: amount of fabric required for seat re-trim?
Wow thank you guys I found a marine vinyl perfect match to the tartan I'll be using for highlights
- Wed Nov 23, 2011 10:39 pm
- Forum: Other
- Topic: amount of fabric required for seat re-trim?
- Replies: 6
- Views: 1290
amount of fabric required for seat re-trim?
Hi i was just wondering if anyone knew how much fabric was required to retrim the front and rear seats of a 4 door mog?
Thanks so much,
Tom
Thanks so much,
Tom
- Wed Sep 07, 2011 2:19 am
- Forum: Mechanical
- Topic: Different sized trunnions?
- Replies: 4
- Views: 944
Different sized trunnions?
Hi all, I took old and new trunnions and put them together.. The trunnions I bought from Bullmotif (same as esm model I asked both) are 6cm in height (the metal casing that is) the ones on the car are made by a company called Allena and they are 6.5 cm long.. I have no idea why that would be the cas...
- Sat Jul 30, 2011 1:48 pm
- Forum: Electrical
- Topic: What gauge wire for ign fuse box?
- Replies: 1
- Views: 439
What gauge wire for ign fuse box?
Hi guys I've split my fuse setup into 2 small fuse boxes one for battery fed stuff and one for the switched circuits.. Just wondering I have a 20a fuse in the battery box which has the feed to the ign switch from there it comes out the other side to the new ign switched box currently have 12ga wire ...
- Thu Jul 28, 2011 10:59 am
- Forum: Electrical
- Topic: Thermo fan wiring with override
- Replies: 2
- Views: 943
Thermo fan wiring with override
Hi all installing a new thermo fan I have the wiring diagram for installing it to work off a standard temp sensor with relay but I was wondering how would I wire in an override switch so if something stuffed up I could just turn it on?
Cheers
Tom
Cheers
Tom
- Wed Jul 20, 2011 12:50 am
- Forum: Electrical
- Topic: New Fusebox Wiring
- Replies: 7
- Views: 1638
Re: New Fusebox Wiring
Because I've had electrical issues with the car.. it was sputtering up through the rev range due to electrical issues... the ign switch was burnt out and there was a dodgy kill switch put in by the previous owner.. so I thought I'd take the opportunity to upgrade my wiring do some safe things.. like...
- Mon Jul 18, 2011 11:56 pm
- Forum: Electrical
- Topic: New Fusebox Wiring
- Replies: 7
- Views: 1638
Re: New Fusebox Wiring
hahaha what the heck is that picture!
- Mon Jul 18, 2011 2:21 pm
- Forum: Electrical
- Topic: New Fusebox Wiring
- Replies: 7
- Views: 1638
Re: New Fusebox Wiring
Thanks for clarifying Alec..
most appreciated!
most appreciated!
- Mon Jul 18, 2011 12:31 am
- Forum: Electrical
- Topic: New Fusebox Wiring
- Replies: 7
- Views: 1638
New Fusebox Wiring
Hi Guys, 1. Just rewiring my fuse setup.. just wondering what ga wire you'd suggest for the primary battery feed to my new fuse box? 2. Also just wondering what amp fuse I'd need for the interior light.. and can anyone tell me which of the 2 purple wires it is? the thick or thin? 3. There are 2 gree...
- Wed Jul 13, 2011 2:14 pm
- Forum: Other
- Topic: How to Mount Stereo In Glovebox?
- Replies: 38
- Views: 7135
Re: How to Mount Stereo In Glovebox?
Thanks for the reply guys!
yes I was thinking of getting one of those din mounting kits but was trying to pick the right one!
yes I was thinking of getting one of those din mounting kits but was trying to pick the right one!
- Wed Jul 13, 2011 2:03 am
- Forum: Other
- Topic: How to Mount Stereo In Glovebox?
- Replies: 38
- Views: 7135
How to Mount Stereo In Glovebox?
Hi I was just wondering if anyone had any tips on how to mount a stereo inside your glovebox? I was hoping to put mine in there and was wondering what approach people had taken i.e. wood panel screwed in somehow? where are the screws mounted etc..
any photos would be fantastic!
Cheers,
Tom
any photos would be fantastic!
Cheers,
Tom
- Wed Jul 06, 2011 11:42 pm
- Forum: General Discussion
- Topic: FORUM front Portal Page
- Replies: 1
- Views: 890
FORUM front Portal Page
Hi i was just wondering if you guys had used specific portal software for the front page of mmoc or if that was actually hardcoded stuff?
Cheers,
Tom
Cheers,
Tom