Morris Minor Owners Club

Thanks philthehill
Yes that's the one, but I only need the first page as in the one in the pic for my copy

Hi can anyone scan the first page of the parts book for me ,so i can print one up
Like this Thanks

@ Murrayminor
Sorry they are for overhead valve not side valve engine, actually a bolt.
@ Rob Thomas
Thread size is 8 x 1.0 metric so yes could find bolts have them flattened and made thinner, but what hardening (hardened and tempered or case hardened)
does anyone know

Hi all Does any one know if new tappet screws/bolts can be bought new . The reason i ask is i was doing the tappet gaps after a de-coke as well as grinding the valves and seats, i was having difficulty getting a gap even though i could move the follower up and down, so took out the valve and spring ...

DEAD

stiff

Used stud extractor set that you use with a socket and it snapped the exhaust stud and as you say studs are ruined but have new set. Having a night off tonight back at it tomorrow, oh got the drain plugs from Moss, a bit dear, but thems the breaks. Using wurth penetrating oil for a long time found i...

Hi Phil Cylinder head studs all done, one broke, one loose, one had been a problem in the past and someone had a step stud made and the block was bored and tapped to a larger size but not tapped straight and then stud bent so the head could be fitted, so i had to find a bolt the right thread (not ta...

Hi all HELP!!!! Does anyone have a surefire way to remove seized studs from the block .I am fed up snapping studs in the block and having to drill and try to remove studs or heli-coil some studs in my block. Heat? .Hammer on end of stud?. Hammer on side of stud?. Releasing fluid?. Any ideas. I am tr...

More years ago than i care to remember when i was working in my fathers garage in school break, i was given the job of removing the trafficators and fitting plates with screws and nuts over the holes so that modern indicators could be fitted. I have no idea if the plates were a accessory item from M...

Thanks Alan
Does any one know where i can get sump plug and is it the same as the same as gearbox plug

Hi all
Is it necessary to soak cork seals and the rope (?) seals in oil before fitting on side valve sump
Ian

brake

Cheers

Hi Rob
Certainly looks like its forward at bottom the same as later cars just with a different shape the the sides

Hi Alan At the moment my car has no water pump but i acquired a NOS original heater kit many moons ago and also a water pump.Both will be fitted one day.I hope to start the restoration this year i promise :oops: :oops: As to the water jacket mine seems to sweat water all over when left for some time...

Hi Somebody who owned my series mm before me cut off the flange that the radiator bolts to on the inner front panel and replaced them with angle iron bolted onto the inner panel, so i want to reinstate as original .I noticed on my later traveller that the flange at the bottom does not stick out as m...

Thats what i was thinking.I cant seem to find a gasket for the cover so i will have to make one and make some washers from the same gasket paper. The clip or whatever it is, is made of brass and fits in the round hole to the front of the block and i wonder is it some sort of a restricter for the flo...

standing

Tartan