Morris Minor Owners Club

[quote="Lesley scott"]Will n9ycc spark plugs fit my morris minor 1098 engine.

I have just got a new Morris minor,it's got a reg plate but the number plate that came of was 3 letters 3 numbers ,would it be possible to an age related plate Ie,with 3letters & 3 numbers .its a 1963

Have not decided yet,

My new restoration project,1963 4 door. Rose taupe,Car now sold

In the

Just finished striping engine ,all parts seem std size ,

Help, starting my first engine rebuild ,got most of the parts

could I put all the +20 parts on a std piston engine .change all the +20

Working on my 1098 silver seal engine ,with new bearings

Just took engine out

All the reading on the other head were all difrent,head had never been decoked,there were signs of marks on the valves ,so decided to change head ,all plugs out ,thanks for replying

Just changed my cylinder head on my Morris minor ,

Just changed my cylinder head on my Morris minor ,they all read 165 ,is that a good reading,cheers

bmcecosse wrote:Why are you changing the prop? Are the cross/yolks worn - or as suggested above - is balancing the issue ?

The propshaft was from another car , very rusty the teeth that fit in the gear box were rusty and worn ,got a good one no rust on teeth so just want to change over cheers

Before you remove the old prop-shaft - mark the diff flange and prop-shaft rear flange adjacent to one another. The reason for this marking is that the replacement prop-shaft may not be better balanced than the original prop-shaft and you may want to refit the original prop-shaft and with the marki...

Putting another propshaft on my Morris minor do I need to line this one up ,? Or just put it straight on ?

Got a oil leak on my gear box ,were it meets the propshaft ,is the seal easy to replace cheers .Thanks for all the advice .