Hello, first post here ,so please excuse beginners efforts!
Having restored a few classics, and recently shrugged off the bonds of employment ,I am on the search for a Traveller.
Why? well because it was my first motor(nostalgia!) , and I want a practical small workhorse without the complexities of modern electronickery.I have experience in rebuilding wood framed cars.
I am fortunate to have a decent workshop with a 2 post lift and all the usual bits & pieces... welder, lathe, compressor etc etc. so
I am after a Traveller in restorable condition, not a total rot box ,preferably something in roadworthy condition or close .
I appreciate that such cars are getting thin on the ground, but am willing to pay a sensible price.
Is there a definitive restoration book/guide on the Traveller?
I am located in central Scotland however am quite happy to travel.
Thanks in advance..
Looking for a project
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Friendly
- Posts: 67
- Joined: Sun Feb 24, 2019 3:14 pm
- MMOC Member: No
-
- Minor Maniac
- Posts: 10815
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
Re: Looking for a project
Welcome to the MMOC web site
You must have got that 'Vital Spark' to consider a Morris Minor Traveller.
I do hope that you are successful in your search and that you regale us with Para Handy's Tales of restoration.
Phil
You must have got that 'Vital Spark' to consider a Morris Minor Traveller.
I do hope that you are successful in your search and that you regale us with Para Handy's Tales of restoration.
Phil
-
- Minor Friendly
- Posts: 67
- Joined: Sun Feb 24, 2019 3:14 pm
- MMOC Member: No
Re: Looking for a project
As I said ,it was my first car and it was "Chust Sublime"
-
- Minor Addict
- Posts: 956
- Joined: Fri Aug 26, 2011 12:42 pm
- Location: West Yorkshire
- MMOC Member: Yes
Re: Looking for a project
The book to get is Ray Newell's "Morris Minor Traveller". Quite expensive, and most of it is general history available elsewhere (sorry Ray) - but it has a section on timber replacement written by Steve Foreman of Woodies (timber frame manufacturer) which is invaluable. Also do your searching on here and you'll find a couple of threads very, very useful - look for NeilMG and Taupe in particular.
I think you are going about it in the right way - some people (including me ) have bought what looked like reasonable condition Minors and have found out the hard (but interesting) way that they may as well have started with little more than a rusty shell!
Mark
I think you are going about it in the right way - some people (including me ) have bought what looked like reasonable condition Minors and have found out the hard (but interesting) way that they may as well have started with little more than a rusty shell!
Mark
-
- Minor Friendly
- Posts: 67
- Joined: Sun Feb 24, 2019 3:14 pm
- MMOC Member: No
Re: Looking for a project
Well, still looking, I have seen a few but they seem to be either held together by fresh air and underseal or "restored to a high standard"
and displaying an optimistic price tag.
Some vendors' idea of "good wood" appears to be suitable for use in a wood burning stove..one even had been repaired using knotty pine!
I expect that my experience is shared with other would-be restorers, but Hey ho, I will keep looking.
and displaying an optimistic price tag.
Some vendors' idea of "good wood" appears to be suitable for use in a wood burning stove..one even had been repaired using knotty pine!
I expect that my experience is shared with other would-be restorers, but Hey ho, I will keep looking.
Re: Looking for a project
Most of the project cars offered nowadays are pretty rusty but repair sections are available and mostly not too expensive so if you have welding facilities you might consider one with a ‘sunshine floor’ as long as it’s cheap.