Hi,
Amongst my stash of spares I have come across the below clutch operating fork, with what looks like an attachment to work in conjunction with a hydraulic clutch slave cylinder.
But am I right and does anyone have any idea what it may be off?
I think it was attached to a spare gearbox at one point but, if so, this was so long ago that I am now uncertain. If so my guess would be MG Midget but feel free to correct me on this.
(Yes, it's been 'tarted up', I have a habit of doing this with some spares periodically, I get an urge...... )
Best wishes,
Mike.
Clutch operating fork from.......??
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Legend
- Posts: 3635
- Joined: Fri Apr 11, 2008 7:28 pm
- Location: Mansfield, Nottinghamshire.
- MMOC Member: Yes
Clutch operating fork from.......??
1954 Series 2: 4 door: "Sally" -- Back on the ground with (slave) wheels and waiting to be resprayed......
1970 Triumph Herald 1200: "Hetty" -- Driven back from Llangollen in Wales (twice.....)
1970 Triumph Herald 1200: "Hetty" -- Driven back from Llangollen in Wales (twice.....)
Re: Clutch operating fork from.......??
Mike
Looks like a Sprite / Midget fork to me , see attached : -
https://www.moss-europe.co.uk/shop-by-m ... 58-66.html
Keep safe
Bob
Looks like a Sprite / Midget fork to me , see attached : -
https://www.moss-europe.co.uk/shop-by-m ... 58-66.html
Keep safe
Bob
-
- Minor Maniac
- Posts: 10816
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
Re: Clutch operating fork from.......??
The release arm/fork shown in the picture above is a 1275cc MG Midget item.
http://www.gerardsgarage.com/Garage/Tec ... arings.htm
http://www.gerardsgarage.com/Garage/Tec ... arings.htm
-
- Minor Legend
- Posts: 3635
- Joined: Fri Apr 11, 2008 7:28 pm
- Location: Mansfield, Nottinghamshire.
- MMOC Member: Yes
Re: Clutch operating fork from.......??
Thanks for the replies, it will go on my 'free spares' pile at the next national.
I've filled one box with giveaways already!........
(Amazing what you amass over the years.)
Best wishes,
Mike.
I've filled one box with giveaways already!........
(Amazing what you amass over the years.)
Best wishes,
Mike.
1954 Series 2: 4 door: "Sally" -- Back on the ground with (slave) wheels and waiting to be resprayed......
1970 Triumph Herald 1200: "Hetty" -- Driven back from Llangollen in Wales (twice.....)
1970 Triumph Herald 1200: "Hetty" -- Driven back from Llangollen in Wales (twice.....)