Anyone know where I can buy a few rubber bung or grommet type things to place in my floor’s unused seat bolt holes? I believe they’re 5/16 BSF.
Had a search on google but nothing obvious is coming up.
Rubber bung or grommet 5/16 BSF
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Addict
- Posts: 721
- Joined: Sun Jun 21, 2015 9:41 am
- Location: Glasgow
- MMOC Member: Yes
-
- Minor Legend
- Posts: 1055
- Joined: Mon Jul 17, 2017 7:45 pm
- MMOC Member: Yes
Re: Rubber bung or grommet 5/16 BSF
I just searched Google and loads of ‘ blanking grommets ‘ came up , some on Fleabay. One of the strange things about Google is that it brings up different results on different computers .
Re: Rubber bung or grommet 5/16 BSF
Try a company called Vital Parts. They sell loads of end caps, bungs, grommets etc.
-
- Minor Maniac
- Posts: 10803
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
Re: Rubber bung or grommet 5/16 BSF
Just fill the unused holes with Eldro dum dum sealing compound. It is flexible, does not go hard and can be painted over. It is what I have used for sealing the surplus seat bolt holes.
-
- Minor Addict
- Posts: 721
- Joined: Sun Jun 21, 2015 9:41 am
- Location: Glasgow
- MMOC Member: Yes
Re: Rubber bung or grommet 5/16 BSF
Seems like that stuff was discontinued about seven years agophilthehill wrote: ↑Sat Sep 05, 2020 11:58 am Just fill the unused holes with Eldro dum dum sealing compound. It is flexible, does not go hard and can be painted over. It is what I have used for sealing the surplus seat bolt holes.
-
- Minor Addict
- Posts: 721
- Joined: Sun Jun 21, 2015 9:41 am
- Location: Glasgow
- MMOC Member: Yes
Re: Rubber bung or grommet 5/16 BSF
Thank you. I’ll look them up.
Had looked at eBay and a lot of the stuff is in Asia with long delivery times (and all metric).
-
- Minor Maniac
- Posts: 10803
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
Re: Rubber bung or grommet 5/16 BSF
If Dum Dum is no longer available why not put a bolt in the hole from underneath trimmed so it is flush with the floor.
-
- Minor Legend
- Posts: 2765
- Joined: Tue Nov 11, 2014 9:41 am
- MMOC Member: No
Re: Rubber bung or grommet 5/16 BSF
The factory simply used a bit of body caulking to plug the hole and protect the thread so I would suggest the same.
-
- Minor Addict
- Posts: 667
- Joined: Sun Aug 27, 2017 6:05 pm
- Location: West Yorkshire
- MMOC Member: Yes
Re: Rubber bung or grommet 5/16 BSF
I just used some grub screws with a dab of loctite.
https://www.ebay.co.uk/itm/5-16-BSF-x-5 ... Sw7z5ef29P
Phil P
https://www.ebay.co.uk/itm/5-16-BSF-x-5 ... Sw7z5ef29P
Phil P