Hello
Ive just bought a 1965 saloon. 1098cc.
Looking at my distributor the cap looks like one that should be fitted to a 950 cc minor, ie leads coming out the side of the cap not the top.
The engine number starts 10 M so it is a 1098cc engine
Could the wrong cap be fitted only our would it have to be the wrong distributor as well. I need to know so I can get new point etc and a new cap or a whole new distributor.
Thanks in anticipation
Mark
distributor identification
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Legend
- Posts: 3204
- Joined: Tue Feb 12, 2002 12:00 am
- Location: S E London
- MMOC Member: No
distributor
The correct type for your car is the 25D4. No.40849B(high comp)
which was introduced from engine no. ...604228 the side entry and top entry caps are both available for this
unit. I prefer the side entry as they give a neater layout...
you may prefer the other type.
Willie
which was introduced from engine no. ...604228 the side entry and top entry caps are both available for this
unit. I prefer the side entry as they give a neater layout...
you may prefer the other type.
Willie
Sorry to butt into this thread but i've been interested for some time now in the internals of these distributors, ie the number of degrees stamped on the toe of the main spindle. it seems that any number of variations will physically go in, but the correct one for a 1098 high comp engine is what i'm looking for. Any ideas where I can get this info please?
-
- Minor Fan
- Posts: 365
- Joined: Wed Feb 13, 2002 12:00 am
- Location: Huntingdon
- MMOC Member: Yes