Page 1 of 1
Smiths RV1 Tachometer.
Posted: Mon May 27, 2019 7:07 pm
by Martlin
- 4A00DDDC-2548-4593-AE6F-B53EF0C87779.jpeg (2.27 MiB) Viewed 959 times
- EE60AD54-DD1A-4A9E-A2B3-D3DEB2BDE5E2.jpeg (2.67 MiB) Viewed 959 times
Hi everybody,
Cannot make out how the “pulse wiring “ goes.
Looks like some sort of connector is missing where the said wire loops.
Am I correct,and can I get round it somehow?
Thanks in anticipation.
Martin.
Re: Smiths RV1 Tachometer.
Posted: Mon May 27, 2019 8:45 pm
by Sleeper
There should be a bridge,plastic with metal inside around which you put one turn of the wire going to the coil , like a winding of a transformer..
John
Page 6 of this...
http://www.triumphclub.co.nz/wp-content ... Smiths.pdf
Re: Smiths RV1 Tachometer.
Posted: Mon May 27, 2019 9:58 pm
by Martlin
Looks like the answer,many thanks John!
Re: Smiths RV1 Tachometer.
Posted: Tue May 28, 2019 7:33 pm
by Martlin
Oh,just one more thing,should the small metal clamp contact the two pegs that can be seen in the photo?
Re: Smiths RV1 Tachometer.
Posted: Tue May 28, 2019 9:18 pm
by Sleeper
Yes,the missing piece makes a magnetic circuit and former for the input signal.
John