Starter motor
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Fan
- Posts: 226
- Joined: Wed Aug 19, 2015 6:18 am
- Location: Nr. Newark
- MMOC Member: No
Starter motor
Hi. I have just swapped the starter motor for what I thought was a like for like starter motor the fresh one I have fitted does not except the nuts for the cable fixing I have tried every conceivable nut I have but non fit it looks like 24 tpi and just under 7 mm diameter any suggestions. Thanks
-
- Minor Maniac
- Posts: 10802
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
Re: Starter motor
Have you put a thread gauge on the threads?
If we know the TPI (imperial) or pitch Metric) the thread can be easily identified.
If we know the TPI (imperial) or pitch Metric) the thread can be easily identified.
-
- Minor Fan
- Posts: 226
- Joined: Wed Aug 19, 2015 6:18 am
- Location: Nr. Newark
- MMOC Member: No
Re: Starter motor
Hi checked the stud it 25 tpi and .264 diameter. Metric also works as 1.0 thread and 6.82 diameter . I have now put my spare starter motor on so all is good . When I get a nut for the other that will be relegated to the spare