Front window fitting

Got any hints or tips? Share them here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
stevelemoir
Minor Friendly
Posts: 15
Joined: Mon Feb 25, 2002 12:00 am
Location: Bristol
MMOC Member: Yes

Front window fitting

Post by stevelemoir »

I had a great deal of trouble fitting the front window with a new rubber.
This was how I finally managed it after trashing one rubber and some metal finisher strips.

Fix the rubber first
Then feed in the cord. I used quite thick nylon cord.
Fit the rubber
Fit the rubber
p1.jpg (1.74 MiB) Viewed 2902 times
Then fix the metal finisher strips.
Feed in the cord
Feed in the cord
p2.jpg (2.09 MiB) Viewed 2902 times
After lubricating the rubber and frame I presented it to the car using 2 straps bought from Toolstation.
(Thorsen Endless Tie Down Set 25mm x 5m No Hook)
I did need to cut the straps a bit shorter otherwise the excess strapping fouled the ratchet.
Strap to the window
Strap to the window
p3.jpg (1.91 MiB) Viewed 2902 times
Still a difficult job but as I worked the cord around the window I was able to tighten the straps as required.
Keep tightening the straps
Keep tightening the straps
p4.jpg (1.94 MiB) Viewed 2902 times
Sleeper
Minor Legend
Posts: 1045
Joined: Tue Nov 08, 2016 3:18 pm
Location: Manchester ( Damp and Miserable ) and that's just the wife...
MMOC Member: Yes

Re: Front window fitting

Post by Sleeper »

10/10

Good man...

John :wink:
Post Reply