lower block water hose outlet 52 918cc sv
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Friendly
- Posts: 28
- Joined: Fri Nov 18, 2011 11:15 pm
- Location: redhill surrey
- MMOC Member: Yes
lower block water hose outlet 52 918cc sv
hi all , i need a replacement block water outlet flange for my 1952 918cc sidevalve , its the diecast flange that attaches the bottom radiator hose to the block , my car was not fitted with heater , the only new ones ive seen are the flanges that just have a drain tap , this is the last thing i need to complete my engine rebuild , atb steve
-
- Minor Friendly
- Posts: 54
- Joined: Tue Jul 19, 2011 11:27 am
- Location: Melbourne, Australia.
- MMOC Member: No
Re: Chasing a lower block water-hose outlet 52 918cc sv
I have a choice of sound used ones here in Melbourne, Australia, some alloy and one steel as I recall. One could easily be posted. Will round-up the ones I have and take photos in about 10 hrs. Not sure how to post them here though........Phil
-
- Series MM Registrar
- Posts: 10183
- Joined: Sun Jul 24, 2005 11:39 pm
- Location: Reading
- MMOC Member: No
Re: lower block water hose outlet 52 918cc sv
[frame][/frame]
Actually it is a water hose inlet elbow, water flows in through the bottom hose, is heated and flows out through the top hose.
Have you tried MMOC Club Spares?
Actually it is a water hose inlet elbow, water flows in through the bottom hose, is heated and flows out through the top hose.
Have you tried MMOC Club Spares?
[sig]3580[/sig]
-
- Minor Friendly
- Posts: 28
- Joined: Fri Nov 18, 2011 11:15 pm
- Location: redhill surrey
- MMOC Member: Yes
Re: lower block water hose outlet 52 918cc sv
'hi mike i contacted bryan and he kindly looked in his stock but unfortunatly there is only types fr pumped engnes , if esm cant help either i think i might get one fabricated in stainless till i can locate the genuine , i can see this part being the holy grail lol , thanks phill for looking downunder - steve
-
- Minor Friendly
- Posts: 28
- Joined: Fri Nov 18, 2011 11:15 pm
- Location: redhill surrey
- MMOC Member: Yes
Re: lower block water hose outlet 52 918cc sv
hi all , i have bought a new outlet elbow fron ian harris morris spares , what a nice chap he is, his forte is prewar morris and stuff ,alot of the engine parts are generic from the cars he services ,he had a new made elbow it has a slightly differce in the angle but fits a treat and only £ 25 ,so looks like we will be going to the ball lol atb steve
-
- Series MM Registrar
- Posts: 10183
- Joined: Sun Jul 24, 2005 11:39 pm
- Location: Reading
- MMOC Member: No
Re: lower block water hose outlet 52 918cc sv
What you have is an elbow from a Morris 8. As long as it fits its ok
[sig]3580[/sig]
-
- Minor Friendly
- Posts: 28
- Joined: Fri Nov 18, 2011 11:15 pm
- Location: redhill surrey
- MMOC Member: Yes
Re: lower block water hose outlet 52 918cc sv
hi , it does fit fine , different exit angle but the car is not concourse , i got it in 24 hours and is better than the rot riddled one i had ,being a hot rodder at heart i was tempted for 1 -2 milliseconds to fit a nice zetec with bike carbs LOL--not realy -steve
-
- Minor Friendly
- Posts: 28
- Joined: Fri Nov 18, 2011 11:15 pm
- Location: redhill surrey
- MMOC Member: Yes
Re: lower block water hose outlet 52 918cc sv
hi , went to brooklands autojumble today ,got water elbow £2 and timing cover £2 from same guy , "result"