Hi
Somebody who owned my series mm before me cut off the flange that the radiator bolts to on the inner front panel and replaced them with angle iron bolted onto the inner panel, so i want to reinstate as original .I noticed on my later traveller that the flange at the bottom does not stick out as much as the top so rad sits further forward at the bottom is it the same for the series mm . If anyone has a photo of the engine side of the inner panel it would be very helpful, or if anyone knows how it sits, it would be greatly appreciated.
Ian
series MM inner front panel
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Legend
- Posts: 3287
- Joined: Tue May 20, 2008 9:24 pm
- Location: Co.Mayo Ireland
- MMOC Member: Yes
-
- Minor Legend
- Posts: 2646
- Joined: Thu May 11, 2006 10:34 am
- Location: Cardiff
- MMOC Member: Yes
Re: series MM inner front panel
Certainly looks further forwards at the bottom. Will look for a better pic. Rob
Cardiff, UK
-
- Minor Legend
- Posts: 3287
- Joined: Tue May 20, 2008 9:24 pm
- Location: Co.Mayo Ireland
- MMOC Member: Yes
Re: series MM inner front panel
Hi Rob
Certainly looks like its forward at bottom the same as later cars just with a different shape the the sides
Certainly looks like its forward at bottom the same as later cars just with a different shape the the sides