Hi folks,
Just a quick question in case anyone here has experience of this. I need a glue to bond 2 pieces of sheet aluminium together. Seen it done before but it was some MOD two part epoxy with only an MOD serial number on it. The join ends up stronger than the base material - any idea where to get it and what to ask for in the real world?
Aluminium glue
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Legend
- Posts: 1675
- Joined: Sun Dec 03, 2006 11:09 am
- Location: Worcestershire
- MMOC Member: Yes
Aluminium glue
cheers
Iain
Fairmile Restorations.
'49 MM, '53 convertible, '55 van, and a '64 van.
Marina p.u., '56 Morris Isis Traveller, a '59 Morris JB van, a'66 J4 van, a '54 Land Rover, Land Rover 130, Renault 5, '36Railton, '35 Hudson, a Mk1 Transit and a Sherpa Camper...
A car can be restored at any time, but is only original once!
Iain
Fairmile Restorations.
'49 MM, '53 convertible, '55 van, and a '64 van.
Marina p.u., '56 Morris Isis Traveller, a '59 Morris JB van, a'66 J4 van, a '54 Land Rover, Land Rover 130, Renault 5, '36Railton, '35 Hudson, a Mk1 Transit and a Sherpa Camper...
A car can be restored at any time, but is only original once!
-
- Minor Maniac
- Posts: 7845
- Joined: Thu Jan 25, 2007 3:18 pm
- Location: South East London
- MMOC Member: No
Re: Aluminium glue
http://www.ebay.co.uk/sch/?_nkw=alumini ... 7143131845
Should be something there.
Should be something there.
"Once you break something you will see how it was put together"
-
- Minor Addict
- Posts: 784
- Joined: Fri Sep 24, 2004 9:09 pm
- Location: Hurstbourne Tarrant, Andover, Hants.
- MMOC Member: Yes
Re: Aluminium glue
Iain,
If you look on the interweb for "Loktite aluminium adhesive" you'll find plenty. However, I've used Araldite (and it's Wilkinson's cheaper variant) for years on metals without failure (including dissimilar metals). Just do the obvious cleaning and you'll be alright.
Regards, MikeN.
If you look on the interweb for "Loktite aluminium adhesive" you'll find plenty. However, I've used Araldite (and it's Wilkinson's cheaper variant) for years on metals without failure (including dissimilar metals). Just do the obvious cleaning and you'll be alright.
Regards, MikeN.
Morris Minor, the car of the future. One day they will all look like this!
-
- Minor Legend
- Posts: 1675
- Joined: Sun Dec 03, 2006 11:09 am
- Location: Worcestershire
- MMOC Member: Yes
Re: Aluminium glue
Thanks for the help - will investigate
cheers
Iain
Fairmile Restorations.
'49 MM, '53 convertible, '55 van, and a '64 van.
Marina p.u., '56 Morris Isis Traveller, a '59 Morris JB van, a'66 J4 van, a '54 Land Rover, Land Rover 130, Renault 5, '36Railton, '35 Hudson, a Mk1 Transit and a Sherpa Camper...
A car can be restored at any time, but is only original once!
Iain
Fairmile Restorations.
'49 MM, '53 convertible, '55 van, and a '64 van.
Marina p.u., '56 Morris Isis Traveller, a '59 Morris JB van, a'66 J4 van, a '54 Land Rover, Land Rover 130, Renault 5, '36Railton, '35 Hudson, a Mk1 Transit and a Sherpa Camper...
A car can be restored at any time, but is only original once!
-
- Minor Legend
- Posts: 3773
- Joined: Wed Jul 14, 2010 10:53 am
- Location: South Manchester
- MMOC Member: Yes
Re: Aluminium glue
Gorilla glues is very strong it even sticks steel