any idea about this crankshaft

Instead of clogging up posts with off topic discussions, have them here. Keep it clean folks!
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
richcook54
Newbie
Posts: 4
Joined: Sun Mar 24, 2019 8:42 am
MMOC Member: No

any idea about this crankshaft

Post by richcook54 »

clearing shed , had this that long i've forgotten what its for and why i've got it
IMG_20190319_145304.jpg
IMG_20190319_145304.jpg (2.83 MiB) Viewed 1295 times
philthehill
Minor Maniac
Posts: 10767
Joined: Thu Jul 19, 2012 12:05 pm
Location: Hampshire
MMOC Member: Yes

Re: any idea about this crankshaft

Post by philthehill »

Can you please post a picture of the flywheel end of the crankshaft as that will help identify what you have.
Phil

richcook54
Newbie
Posts: 4
Joined: Sun Mar 24, 2019 8:42 am
MMOC Member: No

Re: any idea about this crankshaft

Post by richcook54 »

will do . thanks
richcook54
Newbie
Posts: 4
Joined: Sun Mar 24, 2019 8:42 am
MMOC Member: No

Re: any idea about this crankshaft

Post by richcook54 »

I get 1 9/16" centres if that helps identifying,
IMG_20190405_113227.jpg
IMG_20190405_113227.jpg (2.94 MiB) Viewed 1244 times
IMG_20190405_113208.jpg
IMG_20190405_113208.jpg (2.99 MiB) Viewed 1244 times
philthehill
Minor Maniac
Posts: 10767
Joined: Thu Jul 19, 2012 12:05 pm
Location: Hampshire
MMOC Member: Yes

Re: any idea about this crankshaft

Post by philthehill »

Thank you for posting the photos of the rear of the crankshaft.

It is not 803cc, 948cc or 1098cc Minor, it is also not 1275cc Marina and it is not 948cc, 1098cc or 1275cc MG Midget/Sprite.

I will enquire further and come back to you unless someone else comes up with an answer

richcook54
Newbie
Posts: 4
Joined: Sun Mar 24, 2019 8:42 am
MMOC Member: No

Re: any idea about this crankshaft

Post by richcook54 »

I appreciate your efforts, I'm at a loss now as to why I've got it. May be just the magpie in me
Post Reply