An 1951 MM LHD, stripped, with a minimum on rust

Let us all know what you are up to with your current restoration project. Get that Minor on the road!
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
TvdWerf
Minor Addict
Posts: 550
Joined: Wed Jul 28, 2010 9:39 am
Location: Netherlands, Drenthe
MMOC Member: No

An 1951 MM LHD, stripped, with a minimum on rust

Post by TvdWerf »

The biggest problem is not the rust, but the damage from the car.
Some repairs by people, who had only started with the first lesson in welding.Image
A lot of filler, sometimes 10 mm or more, and still some small holes behind it.
I started first with removing the filler, and some bad weldings.[frame]Image[/frame].

What stays is an acceptable start.[frame]Image[/frame][frame]And the car has a dry isolated room to stay.
Image[/frame]

The boot lid, after cleaning [frame]Image[/frame][frame]Image[/frame]
Floor parts[frame]Image[/frame]
Even the bolts and nuts in the doors were in a condition from a 5 year old Japanese car.
The Damage, left, front:[frame]Image[/frame]
And the only welded places on the body, inside and out side the RH A stile.[frame]Image[/frame][frame]Image[/frame]

All the parts are dusty, but dry now[frame]Image[/frame]
And the ID plates:[frame]Image[/frame][frame]Image[/frame]
This one I have to remake, the only problem is that I have to make a hundred of them, and sell the other 99...[frame]Image[/frame]
And last but not least, the engine[frame]Image[/frame]
MM '51 LHD sidevalve
fussyoldfart
Minor Fan
Posts: 231
Joined: Fri May 02, 2008 10:39 pm
Location: Welland, (Niagara Region) Ontario, Canada
MMOC Member: No

Re: An 1951 MM LHD, stripped, with a minimum on rust

Post by fussyoldfart »

If you do remake that shifter knob, let me know what the price is for the second one :-)

Darrell
Fussyoldfart in Welland Ontario.

TvdWerf
Minor Addict
Posts: 550
Joined: Wed Jul 28, 2010 9:39 am
Location: Netherlands, Drenthe
MMOC Member: No

Re: An 1951 MM LHD, stripped, with a minimum on rust

Post by TvdWerf »

with a number of 100, the price will be around £25.
When I order 250, it will be around £22

I think to order it in September, but I need a picture from an undamaged knob, for the number 1.
I go with the old one, and the pictures, to my manufacturer, the are making a mold by measuring the old one, and then we can make the copies.
Before, I need to know how much I have to order.
In the register are about 1000 MM's, so this should be the maximum I think.
MM '51 LHD sidevalve
fussyoldfart
Minor Fan
Posts: 231
Joined: Fri May 02, 2008 10:39 pm
Location: Welland, (Niagara Region) Ontario, Canada
MMOC Member: No

Re: An 1951 MM LHD, stripped, with a minimum on rust

Post by fussyoldfart »

Sorry I didn't answer this a bit sooner but I have been anticipating eye surgery (It's done now for one eye) and not keeping up with my email.

I'm definitely interested in your project and would like very much to have the correct knob for my 1950 MM. As for your potential market, I would think you might sell about 100 at best. Have you any idea how much one would cost?

Darrell McDonald

PS - I can be reached more reliably at <fussyoldfart@gmail.com> I check that every day.

DM
Fussyoldfart in Welland Ontario.

TvdWerf
Minor Addict
Posts: 550
Joined: Wed Jul 28, 2010 9:39 am
Location: Netherlands, Drenthe
MMOC Member: No

Re: An 1951 MM LHD, stripped, with a minimum on rust

Post by TvdWerf »

For me, there is now a high speed job, my wifes daily car is crashed.
I bought another one, but first I have to work on that one...[frame]Image[/frame]
That one has a broken rear axle, but the part from the old car I can re-use for this one.
So the MM is moved back, and the suzuki got a place also in the garage.
And with the holiday to go, I think it will be September or October before I start.
MM '51 LHD sidevalve
TvdWerf
Minor Addict
Posts: 550
Joined: Wed Jul 28, 2010 9:39 am
Location: Netherlands, Drenthe
MMOC Member: No

Re: An 1951 MM LHD, stripped, with a minimum on rust

Post by TvdWerf »

One step more, the other car is back on the road again...
Welded a new part, the old repair was not perfect...[frame]Image[/frame][frame]Image[/frame]

The blue paint on the door was to empty the nozzles after painting the suzuki...
now I have to take time to organize the next steps.
MM '51 LHD sidevalve
TvdWerf
Minor Addict
Posts: 550
Joined: Wed Jul 28, 2010 9:39 am
Location: Netherlands, Drenthe
MMOC Member: No

Re: An 1951 MM LHD, stripped, with a minimum on rust

Post by TvdWerf »

Some welded parts, are just hiding a lot of rust, so I removed it to repair it with original panels:[frame]Image[/frame]
But the body of the car, I had to paint to avid surface rust.
My barn is dry, but never dry enough..
The next parts to paint are waiting for more time (and paint)
Fitted another undamaged cheesgrater:[frame]Image[/frame]
The other side . I think I remove the repaired part also, to look whats behind...[frame]Image[/frame]

And I have to remove more, behind these weldings, it does not look nice...
[frame]Image[/frame]


The washer bottle, is this an origina lone, or not?
Who can tell?[frame]Image[/frame]
MM '51 LHD sidevalve
fussyoldfart
Minor Fan
Posts: 231
Joined: Fri May 02, 2008 10:39 pm
Location: Welland, (Niagara Region) Ontario, Canada
MMOC Member: No

Re: An 1951 MM LHD, stripped, with a minimum on rust

Post by fussyoldfart »

I'm not aware that any of the MMs had windshield washers, only aftermarket kits. I know there is none on my 1950. If you intend to drive it much leave the one you have there, if you want it authentic you should probably remove it completely.
Fussyoldfart in Welland Ontario.

irmscher
Minor Legend
Posts: 3773
Joined: Wed Jul 14, 2010 10:53 am
Location: South Manchester
MMOC Member: Yes

Re: An 1951 MM LHD, stripped, with a minimum on rust

Post by irmscher »

The car is starting to look good :)
TvdWerf
Minor Addict
Posts: 550
Joined: Wed Jul 28, 2010 9:39 am
Location: Netherlands, Drenthe
MMOC Member: No

Re: An 1951 MM LHD, stripped, with a minimum on rust

Post by TvdWerf »

I know that some nowadays standards, on the 1951 cars were an option.
Even the outside mirror was never on my car, and I try to keep it so.
I say this, while i think, my next Toyota Prius will have a camera on the back side, and I like this option.
And, while my MM is my second car, there is not a bigger difference between these two cars, I still not have the Prius Tech edition, but a Hybrid car as daily transport, and a MM for the fun, yes :D
MM '51 LHD sidevalve
C6Dave
Minor Fan
Posts: 310
Joined: Fri Jul 22, 2011 8:16 am
Location: East Northumberland
MMOC Member: No

Re: An 1951 MM LHD, stripped, with a minimum on rust

Post by C6Dave »

Is it worth getting the gear knob made when ESM do this one at £14.50 (click the image to go to the site):

Image
TvdWerf
Minor Addict
Posts: 550
Joined: Wed Jul 28, 2010 9:39 am
Location: Netherlands, Drenthe
MMOC Member: No

Re: An 1951 MM LHD, stripped, with a minimum on rust

Post by TvdWerf »

The ESM version is only a "lookalike",....
One of my suppliers has the possibility to use the original "soft" base material for the gear knob.

Today I got the answer for the washer bottle on a German site:

October 1961:
Flashing direction indicators incorporated into front and rear lamps.
Semaphore type direction indicators discontinued.
Glove compartment lid removed.
Windscreen washers fitted on De Luxe models.
Seatbelts anchorage points built into all models.
New range of colours and upholstery offered
Two-door saloon #925555, four-door saloon #925448, Convertible #947088, Traveller #925679
MM '51 LHD sidevalve
Neil MG
Minor Legend
Posts: 1116
Joined: Sat Jan 15, 2011 8:05 am
Location: Cumbria
MMOC Member: No

Re: An 1951 MM LHD, stripped, with a minimum on rust

Post by Neil MG »

TvdWerf wrote:The ESM version is only a "lookalike",....
One of my suppliers has the possibility to use the original "soft" base material for the gear knob.
I bought one of these. The ESM one is made from rubber and is exactly like the one original one from my car. Is the MM one different from the series II?
1956 Morris Minor Series II
1959 MGA 1600 Roadster
1966 Jaguar Mk2 3.8 MOD
TvdWerf
Minor Addict
Posts: 550
Joined: Wed Jul 28, 2010 9:39 am
Location: Netherlands, Drenthe
MMOC Member: No

Re: An 1951 MM LHD, stripped, with a minimum on rust

Post by TvdWerf »

It is not very clear to see on my first picture, but the side from the ESM version is different.[frame]Image[/frame]
On this picture it is better to see.
MM '51 LHD sidevalve
TvdWerf
Minor Addict
Posts: 550
Joined: Wed Jul 28, 2010 9:39 am
Location: Netherlands, Drenthe
MMOC Member: No

Re: An 1951 MM LHD, stripped, with a minimum on rust

Post by TvdWerf »

Who knows how to take out the (left) door lock completely?
I took out the three screws, the chrome on the outside, but then....
One small part is going through the door panel, the part for locking the door.
Just pull him out with some force, or is there a screw inside?
Or something else?[frame]Image[/frame]
MM '51 LHD sidevalve
Matt Tomkins
Minor Addict
Posts: 798
Joined: Sun Jan 24, 2010 11:01 pm
Location: Aston Clinton, Aylesbury, Bucks or Oxford during term time
MMOC Member: No

Re: An 1951 MM LHD, stripped, with a minimum on rust

Post by Matt Tomkins »

there's a split pin holding it in place i believe


http://www.flickr.com/photos/46862234@N ... 671969048/
http://www.facebook.com/matttomkins

Misty, Morris Minor 2-door, 1970,
fully restored with the help of various of the young members to whom i am forever grateful. http://www.mmoc.org.uk/viewtopic.php?f=28&t=43571
Also Mavis, 1960 Factory Tourer, and a '69 Traveller project: http://www.mmoc.org.uk/viewtopic.php?f=28&t=53487

Join the young owners at: https://www.facebook.com/?ref=logo#!/gr ... [sig]11392[/sig]
TvdWerf
Minor Addict
Posts: 550
Joined: Wed Jul 28, 2010 9:39 am
Location: Netherlands, Drenthe
MMOC Member: No

Re: An 1951 MM LHD, stripped, with a minimum on rust

Post by TvdWerf »

welded some parts today, used a "donor" wing to make one good part.[frame]Image[/frame]
Top and bottom are from 2 different parts.
This one is made ready for the next step:[frame]Image[/frame]
Next week I have to pick up the doors from our industrial painter, they have cleaned them, and sprayed it in a base paint.
Because they are industrial painters, I have to do the finishing job by myself.
Maybe I bring the wings also to them to spray the basic color, but the rust is already removed.
MM '51 LHD sidevalve
TvdWerf
Minor Addict
Posts: 550
Joined: Wed Jul 28, 2010 9:39 am
Location: Netherlands, Drenthe
MMOC Member: No

Re: An 1951 MM LHD, stripped, with a minimum on rust

Post by TvdWerf »

The doors are back, a few weeks later, but they are ready.[frame]Image[/frame]
Only 3 small holes in the bottom...
The Right A-post is renewed, the position was to bad to pull, and a new one to cheap.
So I renewed the whole part.[frame]Image[/frame][frame]Image[/frame][frame]Image[/frame]
Now the doors are back in the car, the new A-post was not as good as the original one, but, the doors are on the right position now.[frame]Image[/frame][frame]Image[/frame]
Next week I hope to move the Right door 2 mm backwards, I have to make a metal plate for it.
Then the front side, there is also something to weld on.
MM '51 LHD sidevalve
alainmoran
Minor Addict
Posts: 845
Joined: Tue May 11, 2004 11:56 am
Location: Pantymwyn, Flintshire, Wales
MMOC Member: No

Re: An 1951 MM LHD, stripped, with a minimum on rust

Post by alainmoran »

Did you ever re-make that shifter knob?

If not, have you considered 3d printing? ... they can make low-volume items MUCH more cheaply than the techniques needed for mass-production.
TvdWerf
Minor Addict
Posts: 550
Joined: Wed Jul 28, 2010 9:39 am
Location: Netherlands, Drenthe
MMOC Member: No

Re: An 1951 MM LHD, stripped, with a minimum on rust

Post by TvdWerf »

I have the address, the old knob in my daily car, and will deliver it to one of the people there with some personal information.
My biggest problem is the time, and the distance from this company my job.
When I am ready, this company is closed,
This company is making more products for our company, so I know what they can do.

The biggest problem:
My time machine is still not ready
MM '51 LHD sidevalve
Post Reply