Gearbox filler funnel

Post by **jollyroger** » Sun Aug 19, 2007 10:45 am

What do people use to fill the gearbox with oil?
I was struggling to get a funnel long enough and most of the plastic orange juice bottles or the like were too wide at the neck. I am not keen to pay a £5 for a proper funnel.
Any suggestions gratefully accepted?

Mean Scotsman

Post by **Orkney** » Sun Aug 19, 2007 10:53 am

get a small (50p) cooking one (edit :- funnel that is) from the supermarket - appropriate length of clean garden hose pipe goes on end of funnel and into the filler hole

Post by **dalebrignall** » Sun Aug 19, 2007 12:28 pm

i use an empty transmission oil bottle . i fill it with 20.50 then fill the gearbox.

Post by **Orkney** » Sun Aug 19, 2007 1:00 pm

that would actually make just as good a funnel too if you cut the bottom off an empty one - built in spout ! like that one !

Post by **mal** » Sun Aug 19, 2007 7:50 pm

I am not keen to pay a £5 for a proper funnel.

For a couple of quid more you can buy the proper tool for the job from machine mart

I bought mine a few years ago and it's sooo easy to use

Mal

Post by **Judge** » Sun Aug 19, 2007 7:58 pm

You paid for it Mal, wouldn't it have been cheaper to use a cover from a glossy magazine, rolled to suit

Post by **RogerRust** » Sun Aug 19, 2007 7:58 pm

ooo errr nurse is that for me!!!

Post by **mal** » Sun Aug 19, 2007 8:24 pm

You paid for it Mal

Ah you're back then Bill

Tis only the majority of shows I refuse to pay to enter

I'm always buying tools and must admit this one makes life very easy

ooo errr nurse is that for me

Yes.. they do like it up-em

Mal

Post by **rayofleamington** » Sun Aug 19, 2007 10:43 pm

i use an empty transmission oil bottle . i fill it with 20.50 then fill the gearbox.

Me too. I have about 10 of them spare* so if anyone wants one, let me know. The big advantage over a funnel is that they stop filling when you stop squeezing - avoiding most of the mess!

* I didn't buy them - they were empties rescued from the bin at work. I'm too tight to buy oil by the litre, it's cheaper by the gallon!

Post by **dunketh** » Mon Aug 20, 2007 10:53 am

The hose that came with my petrol can actually fits the filler hole perfectly with barely a milimeter to spare.
An added bonus is the fact its bendy too.

Post by **mal** » Mon Aug 20, 2007 11:33 am

The only advantage with the proper tool that I bought is that it sucks the oil from the gallon can and then just squeeze it in the gearbox.. and repeat.. dead easy and worth every penny

Mal

Post by **RogerRust** » Mon Aug 20, 2007 7:10 pm

joking apart I'm going to get one next time I see one for sale. I hate the rear axle one because you cant see when it is nearly full. So the facility to suck a bit out before it makes a mess would be good.

Post by **mal** » Mon Aug 20, 2007 7:37 pm

I'm going to get one next time I see one for sale

Good investment Roger

Mal