1098cc gearbox question
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Legend
- Posts: 1062
- Joined: Tue Apr 14, 2009 8:51 am
- Location: Atherstone,Warwickshire
- MMOC Member: No
1098cc gearbox question
hi all my friend has a split screen morris and wondered can he use the long gear stick on the 1098cc gearbox or would he have to stick to the 803cc gearbox,i have heard that you can use them on a 948cc gearbox by altering the remote housing but unsure with the 1098cc gearbox
cheers josh
cheers josh
Re: 1098cc gearbox question
It has been done josh - but not a straight swap on the 1098 box. It is a straight swap on a 948 box. If you search back you should find how others have overcome the problems.
-
- Minor Legend
- Posts: 1062
- Joined: Tue Apr 14, 2009 8:51 am
- Location: Atherstone,Warwickshire
- MMOC Member: No
Re: 1098cc gearbox question
have had a look and people have said they have done it bought cant find out how you do it
cheers josh
cheers josh
-
- Minor Legend
- Posts: 1140
- Joined: Thu Jan 19, 2012 4:55 pm
- Location: Le Tronquay, nr Bayeux, en France - Pop in for a cuppa!
- MMOC Member: No
Re: 1098cc gearbox question
I think a spacer is needed between the remote section and the box.
Re: 1098cc gearbox question
Pretty sure Callyspoy did it without using a spacer - some mods to the selectors IIRC ....but it was a while back.
-
- Minor Legend
- Posts: 1062
- Joined: Tue Apr 14, 2009 8:51 am
- Location: Atherstone,Warwickshire
- MMOC Member: No
Re: 1098cc gearbox question
think ive got it 4mm aluminium spacer,2 gaskets,mainshaft space machined to 84mm long,longer studs,grind end of selector rods and use 803 remote housing.