948 Engine / 1098 gearbox - what clutch kit???
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Addict
- Posts: 519
- Joined: Thu Aug 09, 2007 7:11 pm
- Location: Lymington, Hampshire
- MMOC Member: No
948 Engine / 1098 gearbox - what clutch kit???
I'm about to swap out my gearbox and I would think it prudent to replace the clutch at the same time. I have a 948 engine and a 1098 gearbox fitted. My question is - should I fit a new 1098 clutch kit or a 948 one??????????????
That's strange R2, the damage doesn't look so bad from here!
Re: 948 Engine / 1098 gearbox - what clutch kit???
Which flywheel you got?
[sig]8426[/sig]
Compare the Minors - Simples !! http://mog.myfreeforum.org/index.php
Compare the Minors - Simples !! http://mog.myfreeforum.org/index.php
-
- Minor Addict
- Posts: 519
- Joined: Thu Aug 09, 2007 7:11 pm
- Location: Lymington, Hampshire
- MMOC Member: No
Re: 948 Engine / 1098 gearbox - what clutch kit???
Ummm! Not sure, any clues?
That's strange R2, the damage doesn't look so bad from here!
-
- Series MM Registrar
- Posts: 10183
- Joined: Sun Jul 24, 2005 11:39 pm
- Location: Reading
- MMOC Member: No
Re: 948 Engine / 1098 gearbox - what clutch kit???
You will have to fit the same as you already have.
[sig]3580[/sig]
-
- Minor Addict
- Posts: 519
- Joined: Thu Aug 09, 2007 7:11 pm
- Location: Lymington, Hampshire
- MMOC Member: No
Re: 948 Engine / 1098 gearbox - what clutch kit???
Is there a size difference?
That's strange R2, the damage doesn't look so bad from here!
-
- Minor Legend
- Posts: 1186
- Joined: Mon Apr 23, 2007 2:32 pm
- Location: Dartmoor
- MMOC Member: No
Re: 948 Engine / 1098 gearbox - what clutch kit???
The clutches are a different size. Overall diameter of the flywheel is the same, but the contact surface for the driven plate is different for sure. As above, you'll have to find what you've got before you know what to buy.
Re: 948 Engine / 1098 gearbox - what clutch kit???
If you have a pressed engine backplate there's a good chance you'll have a 948 flywheel and clutch.
If it's a solid machined one it'll be 1098, but you won't know 100% until you take the box off.
If it's a solid machined one it'll be 1098, but you won't know 100% until you take the box off.
[sig]8426[/sig]
Compare the Minors - Simples !! http://mog.myfreeforum.org/index.php
Compare the Minors - Simples !! http://mog.myfreeforum.org/index.php
-
- Minor Addict
- Posts: 519
- Joined: Thu Aug 09, 2007 7:11 pm
- Location: Lymington, Hampshire
- MMOC Member: No
Re: 948 Engine / 1098 gearbox - what clutch kit???
Thanks guys!
That's strange R2, the damage doesn't look so bad from here!
-
- Series MM Registrar
- Posts: 10183
- Joined: Sun Jul 24, 2005 11:39 pm
- Location: Reading
- MMOC Member: No
Re: 948 Engine / 1098 gearbox - what clutch kit???
Look through the inspection hole in the gearbox clutch housing and you should be able to see the clutch pressure plate
[sig]3580[/sig]