Can anyone help me to identify these manifolds? I bought them ages ago when I was considering upgrading an 803 engined car to a larger 'A' series engine.
I think the top one is 948?
Middle could be 1098?
Bottom - 1275?
Cheers,
Roger[frame][/frame]
Manifold identification
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Addict
- Posts: 519
- Joined: Thu Aug 09, 2007 7:11 pm
- Location: Lymington, Hampshire
- MMOC Member: No
Manifold identification
That's strange R2, the damage doesn't look so bad from here!
Re: Manifold identification
Top one looks exactly the same as the one I took off my 1098, middle one is early (998?) Midget and bottom one is later 1275 Midget just like the one I'm about to fit.
-
- Minor Addict
- Posts: 519
- Joined: Thu Aug 09, 2007 7:11 pm
- Location: Lymington, Hampshire
- MMOC Member: No
Re: Manifold identification
Brilliant, thanks. Maybe the 998 was from a Mini - think I was recommended that it was the best option for a 948.
That's strange R2, the damage doesn't look so bad from here!
Re: Manifold identification
I don't think so as they had a combined inlet/exhaust too, pretty sure it's off a Midget. It looks like it will line up with the Minor exhaust but you will obviously need an alloy inlet manifold to go with the new exhaust.
-
- Minor Addict
- Posts: 519
- Joined: Thu Aug 09, 2007 7:11 pm
- Location: Lymington, Hampshire
- MMOC Member: No
Re: Manifold identification
Thanks, maybe that middle one was from a 1098 Midget, don't think the 998 found it's way into a Midget I guess.
That's strange R2, the damage doesn't look so bad from here!
Re: Manifold identification
Yep, I think you're right. Pretty sure its a smaller bore than the 1275 item so should match up with the Minor exhaust too.
Re: Manifold identification
It's very far from a 'best option'....... but it's 'ok' on a standard engine.