1275 exhaust manifold questions.

Discuss mechanical problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
bmcecosse
Minor Maniac
Posts: 46561
Joined: Wed Feb 16, 2005 11:24 pm
Location: ML9
MMOC Member: No

Re: 1275 exhaust manifold questions.

Post by bmcecosse »

They ALL are - that tells you nothing............ :roll:
ImageImage
Image
Top
austinh7
Minor Friendly
Posts: 16
Joined: Wed May 25, 2016 10:13 pm
MMOC Member: No

Re: 1275 exhaust manifold questions.

Post by austinh7 »

bmcecosse wrote:They ALL are - that tells you nothing............ :roll:
I realised that last night while trying to work out what I have got.

There a couple of articles I have found so will try and work it out later today.
Top
philthehill
Minor Maniac
Posts: 10794
Joined: Thu Jul 19, 2012 12:05 pm
Location: Hampshire
MMOC Member: Yes

Re: 1275 exhaust manifold questions.

Post by philthehill »

bmcecosse wrote:They ALL are - that tells you nothing............ :roll:
Whilst it may be a 940 head not all 940 heads are the same - there are several variants of the 940 head. Those variants include valve size (listed in the head chart above) and the head shape and sculpturing or not around the thermostat housing and inlet/exhaust ports.
Photographs of the head around the thermostat housing and the inlet exhaust ports would be helpful.
Here is a photo of a standard 940 1275cc Sprite / Midget head around the thermostat housing
Are there any numbers stamped on the top flat surface of the head by the thermostat. [frame]Image[/frame]

Top
Post Reply

Return to “Mechanical”