Hi
can anyone tell me if the all cast iron manifolds on a 948cc and the 1098cc are the same?
Im only asking because im using a 1098 head but my 948 manifold and i dont have a 1098 to compare
Thanks
Mark
manifolds
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Maniac
- Posts: 10816
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
Re: manifolds
The 948cc manifold and the 1098cc manifolds are different but interchangeable.
The 948cc manifold is a two piece manifold in that the inlet is alloy and the exhaust cast iron. They are bolted together.
The 1098cc manifold is a one piece casting and is all cast iron.
See diagrams in the link below:-
http://www.moss-europe.co.uk/inlet-exha ... b486b.html
The 948cc manifold is a two piece manifold in that the inlet is alloy and the exhaust cast iron. They are bolted together.
The 1098cc manifold is a one piece casting and is all cast iron.
See diagrams in the link below:-
http://www.moss-europe.co.uk/inlet-exha ... b486b.html
Re: manifolds
Thanks Phil
The manifold that was on my 948 head is all cast iron so guess it might of been swapped some time in the past?
Sounds like i dont need too worry then
Mark
The manifold that was on my 948 head is all cast iron so guess it might of been swapped some time in the past?
Sounds like i dont need too worry then
Mark
-
- Minor Maniac
- Posts: 10816
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
Re: manifolds
Mark
Check that the engine fitted is indeed a 948cc.
It should have 950 cast into the block just below the front cam foller/tappet cover.
The 1098cc engine has a 1100 metal tag attached to the block in a similar place.
The manifold that you have is a good upgrade for the 948cc engine.
Phil
Check that the engine fitted is indeed a 948cc.
It should have 950 cast into the block just below the front cam foller/tappet cover.
The 1098cc engine has a 1100 metal tag attached to the block in a similar place.
The manifold that you have is a good upgrade for the 948cc engine.
Phil