Discuss mechanical problems here.
4 posts • Page 1 of 1
Morning all, I’ve set the timing up on my 1098 statically to tdc so I’m presuming that to get it running at its best I’m going to need to make slight adjustments to the distributor? I guess I probably need to retard it a little as it should be set to approx 5 btdc, is that correct? What way do I turn the distributor to retard ? Anti-clockwise? Thanks
With the distributor cap removed, ease the engine over with the starting handle and note which way the gubbins in the dizzy turns. To retard the ignition (but see reply above first) the distributor body will need turning in the same direction; to advance it, turn it the other way.
Who is online
Users browsing this forum: No registered users and 13 guests