Does anyone have any recommendations for decent rear brake cylinders for the later 1000s? One of mine has seized up, so I shall have to replace it (or both) soon.
Are the Borg & Beck ones any good, or are they as bad as their clutches are latterly reported to be?
https://www.ebay.co.uk/itm/2-x-BORG-BEC ... 2888873854
Rear brake slave cylinders - which are best?
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
Rear brake slave cylinders - which are best?
Last edited by Chipper on Tue Apr 20, 2021 10:44 pm, edited 1 time in total.
Maurice, E. Kent
(1970 Traveller)
(1970 Traveller)
-
- Minor Legend
- Posts: 2765
- Joined: Tue Nov 11, 2014 9:41 am
- MMOC Member: No
Re: Rear brake slave cylinders - which are best?
I honestly doubt there is any difference between those and the cheap reproduction ones sold by ESM etc. I would be very surprised if there were different manufacturers of pattern cylinders. The picture is not detailed at all. I have the cheap pattern ones on the rear of my car because the so called original ones are not original in any case. The cheap ones have been fine