Traveller rear door seals

Discuss Bodywork problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
Napoleon Boot
Minor Fan
Posts: 189
Joined: Wed Nov 21, 2018 7:48 pm
MMOC Member: Yes

Traveller rear door seals

Post by Napoleon Boot »

I recently fitted the quad rubber all around the rear door aperture, and the flat rubber strip that goes between the two doors, and it’s made a massive difference; the cabin no longer fills with exhaust fumes and there’s less of a puddle in the boot when it rains :lol:

There’s still the odd drop getting through though and I’d like to get it as weather proof as I can. I’ve got this other sticky topped seal (It’s about 1/2 inch square with a self adhesive side) but cannot figure out where it should go: https://www.morrisminor.org.uk/parts/74 ... -traveller

Charles Ware’s website says it goes across the top of the doorframe but there’s already quadrant there, should it go on the inside vertical lip of the door itself? I’ve looked in the Morris Traveller book but it’s not mentioned, and I’ve not found any helpful photos on the web!
E509210B-E670-416A-9B5F-F98E85D41172.jpeg
E509210B-E670-416A-9B5F-F98E85D41172.jpeg (288.43 KiB) Viewed 1655 times
1971 Adderley Park Traveller, "Peggy". 1098 engine, automatic transmission
Image
gtt1951
Minor Addict
Posts: 978
Joined: Thu Oct 04, 2012 5:01 pm
Location: Farnborough, Hampshire
MMOC Member: Yes

Re: Traveller rear door seals

Post by gtt1951 »

Hello Napoleon,
I've replaced all my rubber seals as the doors were rattling - the original rubbers having mainly perished.
Looking at your "late" traveller woodwork, it looks very different from my 1956 Series II wood.
IMG_20190715_170719.jpg
IMG_20190715_170719.jpg (1.66 MiB) Viewed 1630 times
With the quadrant rubber fitted, there is no wood showing above it, on the transom rail
IMG_20200729_132012.jpg
IMG_20200729_132012.jpg (1.78 MiB) Viewed 1630 times
I used to have some "peel and stick" foam strip on the bottom of the frame (to minimise the rattle of the loose doors, until I fitted the quadrant.
IMG_20190715_170723.jpg
IMG_20190715_170723.jpg (1.93 MiB) Viewed 1630 times
You can just see the blue face of the strip prior to removal.
Maybe, with your transom rail being the way it is, does the top lip of the door contact the rail or the quad foam?

George.
Image
'50 Low-light with 918 Side-valve engine,
'51 High-light with Side-valve 918 engine,
'55 4-dr with 803 engine,
'56 Traveller with 1098 engine.
bufferzone
Minor Friendly
Posts: 66
Joined: Thu Aug 23, 2012 8:18 pm
MMOC Member: No

Re: Traveller rear door seals

Post by bufferzone »

Mine has the rubber quadrant seals on left and right frame, bottom frame and left door, with the foam rubber from Ware across the top frame. Here is a picture of the top of the left door which has a metal plate and the rubber wraps over the top and an inch or so on the inside, cut flat where it wraps over and in. Works well.
Attachments
C170997F-5807-4DC2-B016-95D6BDD1DF8B.jpeg
C170997F-5807-4DC2-B016-95D6BDD1DF8B.jpeg (1.44 MiB) Viewed 1612 times
Napoleon Boot
Minor Fan
Posts: 189
Joined: Wed Nov 21, 2018 7:48 pm
MMOC Member: Yes

Re: Traveller rear door seals

Post by Napoleon Boot »

Thanks both for the photos - always really interesting to compare Travellers from different eras and see all the minor (ha) differences - I do wonder what the reasoning is for some of the changes! Peggy has her original timber and rear doors; perhaps the foam CW sell is intended for older models. I'll have a look at how the door and aperture interface and see if a bit of foam on the door might help at all.
1971 Adderley Park Traveller, "Peggy". 1098 engine, automatic transmission
Image
Mark Wilson
Minor Addict
Posts: 956
Joined: Fri Aug 26, 2011 12:42 pm
Location: West Yorkshire
MMOC Member: Yes

Re: Traveller rear door seals

Post by Mark Wilson »

If you haven't already got it, the Ray Newell/Steve Foreman Morris Traveller book is very good on this sort of detail. Not cheap, though!
Napoleon Boot
Minor Fan
Posts: 189
Joined: Wed Nov 21, 2018 7:48 pm
MMOC Member: Yes

Re: Traveller rear door seals

Post by Napoleon Boot »

Mark Wilson wrote: Sun Aug 02, 2020 9:14 am If you haven't already got it, the Ray Newell/Steve Foreman Morris Traveller book is very good on this sort of detail. Not cheap, though!
I got it for Christmas a couple of years ago - great book, but couldn't find good pictures of the rear door seals unfortunately! I'd like to get his Original Morris Minor book - one for next Xmas maybe.
1971 Adderley Park Traveller, "Peggy". 1098 engine, automatic transmission
Image
Mark Wilson
Minor Addict
Posts: 956
Joined: Fri Aug 26, 2011 12:42 pm
Location: West Yorkshire
MMOC Member: Yes

Re: Traveller rear door seals

Post by Mark Wilson »

Sorry, should have read your original post more carefully! You are correct, the book isn't quite as clear as I remembered, the best photos being on pages 112 and 117. I've fitted the seals to my new wood recently, so let me know if you want pictures from any particular viewpoint. Mine''s a 71 (manual!).
Napoleon Boot
Minor Fan
Posts: 189
Joined: Wed Nov 21, 2018 7:48 pm
MMOC Member: Yes

Re: Traveller rear door seals

Post by Napoleon Boot »

Thanks Mark! It's the top of the doors that have me stumped. I had a look, and the top lip of the door doesn't come high enough to properly meet the rubber quadrant around the door aperture, though I don't know if this is by design or if my doors have just drooped! There's a tiny bit of overlap but not enough to make a snug seal. If you could take a photo of the top of the doors as they close against the frame, that would be really useful!

Seb
1971 Adderley Park Traveller, "Peggy". 1098 engine, automatic transmission
Image
gtt1951
Minor Addict
Posts: 978
Joined: Thu Oct 04, 2012 5:01 pm
Location: Farnborough, Hampshire
MMOC Member: Yes

Re: Traveller rear door seals

Post by gtt1951 »

This is the top of the LHD door and how the rebate part of the door edge closes onto the new rubber.
top of left door closure.jpg
top of left door closure.jpg (399.35 KiB) Viewed 1470 times
The doors are a bit dropped as you can see from the placement of the door lip.
I, unfortunately, used quadrant on the door vertical overlap join, instead of the flat rubber seal, so closing the doors requires that both get closed simultaneously, but it gives a very good seal and the rattles have gone away.

George.
Image
'50 Low-light with 918 Side-valve engine,
'51 High-light with Side-valve 918 engine,
'55 4-dr with 803 engine,
'56 Traveller with 1098 engine.
Mark Wilson
Minor Addict
Posts: 956
Joined: Fri Aug 26, 2011 12:42 pm
Location: West Yorkshire
MMOC Member: Yes

Re: Traveller rear door seals

Post by Mark Wilson »

Just taken these, so quality affected by poor light! The first two show the space at the top of the door and how the seal fills the gap. There's a tiny fraction more frame showing beneath the roof than ideal, but stretching the aluminium over isn't easy!

The last blurry one shows the bottom of the same door - when fitting the doors you have to even out the gaps as well as possible, as the height of the door and the height of the frame are predetermined.

The little L shaped striker plate is home made as there wasn't one on the previous door. I think I've got it right, but if not someone please let me know!

Mark
Attachments
DSCF0558 (Small).JPG
DSCF0558 (Small).JPG (57.25 KiB) Viewed 1454 times
DSCF0563 (Small).JPG
DSCF0563 (Small).JPG (60.34 KiB) Viewed 1454 times
DSCF0567 (Small).JPG
DSCF0567 (Small).JPG (55.04 KiB) Viewed 1454 times
Napoleon Boot
Minor Fan
Posts: 189
Joined: Wed Nov 21, 2018 7:48 pm
MMOC Member: Yes

Re: Traveller rear door seals

Post by Napoleon Boot »

Thanks both, that's brilliant, and will hopefully help others in future as I've searched high and low for good pictures of the door interface and drawn a blank!

It looks like my doors have dropped about half an inch, as the top of the doors is about level with the bottom of the rubber quadrant. They wiggle about on the hinges so it's something to have a look at before the good weather breaks...

Thanks again!
Seb
1971 Adderley Park Traveller, "Peggy". 1098 engine, automatic transmission
Image
Post Reply