Wolseley brakes,what parts fit?
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
Wolseley brakes,what parts fit?
I have acquired a set of Wolseley 9" drums and backplates(2 sets actually and I will be offering one for sale on here soon).
The prices of Wolseley original parts are ridiculously expensive.
I have read that moggy wheel cylinders can be made to fit with modification to the backplate.What are these mods exactly and which cylinders?.
Also that TR7 rear brake shoes can be adapted to fit.Once again adapted in what way and which cylinders,there are different items for 4 and 5 speed TR7s?
What springs will be required?
Will standard hoses fit ok?
Any other tips/suggestions including part numbers if possible would be greatfully received.
TIA
Mick
The prices of Wolseley original parts are ridiculously expensive.
I have read that moggy wheel cylinders can be made to fit with modification to the backplate.What are these mods exactly and which cylinders?.
Also that TR7 rear brake shoes can be adapted to fit.Once again adapted in what way and which cylinders,there are different items for 4 and 5 speed TR7s?
What springs will be required?
Will standard hoses fit ok?
Any other tips/suggestions including part numbers if possible would be greatfully received.
TIA
Mick
-
- Minor Maniac
- Posts: 10815
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
Re: Wolseley brakes,what parts fit?
Today came across an old invoice for Wolsely 1500 brake wheel cylinders (no part numbers quoted) and the following may be useful:-
Wolseley 1500 Spares
2 Purberry Grove
Ewell
Surrey
KT17 1LU
tel:- 01 393 2194.
Wolseley 1500 Spares
2 Purberry Grove
Ewell
Surrey
KT17 1LU
tel:- 01 393 2194.
Re: Wolseley brakes,what parts fit?
Thanks a lot Phil.The Wolseley Lockheed cylinders are £140 for four.I would never pay that.MM ones are far cheaper.
-
- Series MM Registrar
- Posts: 10183
- Joined: Sun Jul 24, 2005 11:39 pm
- Location: Reading
- MMOC Member: No
Re: Wolseley brakes,what parts fit?
The part of the wheel cylinder which projects through the back plate is longer on the Minor cylinder so the slot in the Wolseley back plate needs to be extended. If Wolseley return springs are not available then 1098 springs can be fitted to the closest holes in the shoes. You will also need longer cylinder connecting pipes
[sig]3580[/sig]
Re: Wolseley brakes,what parts fit?
Thanks Mike.What about adjusters?Also do you have any info on the TR7 shoes?
-
- Series MM Registrar
- Posts: 10183
- Joined: Sun Jul 24, 2005 11:39 pm
- Location: Reading
- MMOC Member: No
Re: Wolseley brakes,what parts fit?
1098 adjusters. I have no experience of TR7 brakes
[sig]3580[/sig]
Re: Wolseley brakes,what parts fit?
Hi Mick
I am away at the moment, but I have the part no, for the shoes at home.
If no one comes up with them, PM me to remind me and I will post them.
Regards Win
I am away at the moment, but I have the part no, for the shoes at home.
If no one comes up with them, PM me to remind me and I will post them.
Regards Win
South Yorkshire
Re: Wolseley brakes,what parts fit?
Thanks Win.Have PMd you.
Cheers
Mick
Cheers
Mick
Re: Wolseley brakes,what parts fit?
You DON'T need longer connecting pipes - the 8" pipes fit perfectly well, as does the Minor flexi. And the adjusters, and the springs can be used too. If too tight - just drill new holes in the shoes. You need the brake shoes from a later TR7 - which has 9" rear brakes fitted (earlier cars only had 8" brakes ). And you will need to file the notch in them - where the adjuster sits on a Minor set-up, and 'possibly' shave off any excess friction material overhanging the sides of the metal shoes. Search ebay for them - prices vary....
Re: Wolseley brakes,what parts fit?
Hi Mick
Pic of my front off side shoe set up as promised, hope it helps.
Regards Win[frame][/frame]
Pic of my front off side shoe set up as promised, hope it helps.
Regards Win[frame][/frame]
South Yorkshire
Re: Wolseley brakes,what parts fit?
Well done WIN! Did you need to shave the sides of the shoes at all? The set I dug out yesterday are a bit too wide - easily rectified though. I have another less wide set somewhere - just can't quite put my hands on them at the moment... Do you find the brakes a good improvement?
Re: Wolseley brakes,what parts fit?
Thanks for that win and it wasn't too long a wait as I still haven't got round to fitting them yet although I plan to do so this coming week as I recently bought all new cylinders,springs,pipes and sundries for them.
Thanks
Mick
Thanks
Mick
-
- Minor Friendly
- Posts: 50
- Joined: Tue Sep 16, 2008 2:08 pm
- Location: Essen, Germany
- MMOC Member: No
Re: Wolseley brakes,what parts fit?
Hi there,
Part No for TR7 shoes suitabled for Wolseley brake is
Unipart GBS 813
Hope this helps.
Achim[frame][/frame]
Part No for TR7 shoes suitabled for Wolseley brake is
Unipart GBS 813
Hope this helps.
Achim[frame][/frame]
This message board is like a family - you can't choose the other members!!!
But remember engine oil is thicker than water.
But remember engine oil is thicker than water.
Re: Wolseley brakes,what parts fit?
Yes I got them.
Re: Wolseley brakes,what parts fit?
That's what it says on WIN's shoes too! Unfortunately no 'cheap' ones on ebay at the moment.... And he has the springs in the correct holes.
Re: Wolseley brakes,what parts fit?
Hi All
I had to remove approximately 2mm from the sides, and remove some the shoe its self, with a file to fit the adjuster.
As regard the value of the upgrade, I removed the original 7" to fit the 9", no servo, cost I think, about £5,
20 odd years ago.
You have to watch the price for replacement shoes, still some deals around, if you can wait.
The results were awesome.
Regards Win
I had to remove approximately 2mm from the sides, and remove some the shoe its self, with a file to fit the adjuster.
As regard the value of the upgrade, I removed the original 7" to fit the 9", no servo, cost I think, about £5,
20 odd years ago.
You have to watch the price for replacement shoes, still some deals around, if you can wait.
The results were awesome.
Regards Win
South Yorkshire
Re: Wolseley brakes,what parts fit?
Cost of the parts now is many many times that!
Re: Wolseley brakes,what parts fit?
A very good investment! Just look at this - extortion!! http://www.ebay.co.uk/itm/WOLSELEY-1500 ... 43c7ad91bc and these -even more expensive..... Fortunately they last a very long time ! http://www.ebay.co.uk/itm/1958-65-Wolse ... 338b789a24
And this for cylinders....."gasp"....when Minor cylinders can be fitted v easily...... http://www.ebay.co.uk/itm/AUSTIN-A40-Fa ... 35d48aaf67
And this for cylinders....."gasp"....when Minor cylinders can be fitted v easily...... http://www.ebay.co.uk/itm/AUSTIN-A40-Fa ... 35d48aaf67