Pcd size
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Legend
- Posts: 1666
- Joined: Thu May 12, 2016 6:33 am
- MMOC Member: No
Re: Pcd size
Presuming you mean that of the wheels? Not the crank or other parts?
I expect it will be 3 3/4” or 4”. Doubtless it is imperial, not metric. Not too difficult to drop a tape measure across the wheel studs, or spare wheel?
Even from measuring the distance between two adjacent studs, the PCD can easily be calculated. There are easy conversions/calculators on the net for any number of studs if your trigonometry is not up to scratch.
I expect it will be 3 3/4” or 4”. Doubtless it is imperial, not metric. Not too difficult to drop a tape measure across the wheel studs, or spare wheel?
Even from measuring the distance between two adjacent studs, the PCD can easily be calculated. There are easy conversions/calculators on the net for any number of studs if your trigonometry is not up to scratch.
-
- Minor Fan
- Posts: 434
- Joined: Wed Jun 07, 2017 11:37 pm
- Location: Carmarthenshire
- MMOC Member: No