is dot4 synthetic compatible?

Discuss mechanical problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
xpress
Minor Addict
Posts: 761
Joined: Wed Jul 22, 2009 10:08 am
Location: West London
MMOC Member: No

is dot4 synthetic compatible?

Post by xpress »

Hi used shell dot4 I have half litre carlube dot4 synthetic. Same stuff? Or do i need to use mineral based. Is the shell stuff probably synthetic?

Stig
Minor Addict
Posts: 737
Joined: Wed Oct 13, 2004 1:25 pm
Location: Berkshire
MMOC Member: No

Re: is dot4 synthetic compatible?

Post by Stig »

Doesn't it say on the bottle? I know DOT5 silicone fluid says it's compatible with dot4 fluid.

Unless it's special stuff for Rolls-Royce or Citroen then I would have thought it's OK.
Neil MG
Minor Legend
Posts: 1116
Joined: Sat Jan 15, 2011 8:05 am
Location: Cumbria
MMOC Member: No

Re: is dot4 synthetic compatible?

Post by Neil MG »

DOT5 silicon is definitely NOT compatible with DOT4!

But yes it is ok to mix the Carlube DOT4 with the Shell DOT4. No need for mineral based fluid.
1956 Morris Minor Series II
1959 MGA 1600 Roadster
1966 Jaguar Mk2 3.8 MOD
rayofleamington
Moderator
Moderator
Posts: 7679
Joined: Fri Nov 01, 2002 2:55 pm
Location: LEAMINGTON SPA
MMOC Member: No

Re: is dot4 synthetic compatible?

Post by rayofleamington »

Neil MG wrote:DOT5 silicon is definitely NOT compatible with DOT4!

But yes it is ok to mix the Carlube DOT4 with the Shell DOT4. No need for mineral based fluid.
Anything mineral is NOT compatible with british car braking systems (or most others too!) and will wreck the seals.
Ray. MMOC#47368. Forum moderator.

Jan 06: The Minor SII Africa adventure: http://www.minor-detour.com
Oct 06: back from Dresden with my Trabant 601 Kombi
Jan 07: back from a month thru North Africa (via Timbuktu) in a S3 Landy
June 07 - back from Zwickau Trabi Treffen
Aug 07 & Aug 08 - back from the Lands End to Orkney in 71 pickup
Sept 2010 - finally gave up breaking down in a SII Landy...
where to break down next?
2013... managed to seize my 1275 just by driving it round the block :(
Stig
Minor Addict
Posts: 737
Joined: Wed Oct 13, 2004 1:25 pm
Location: Berkshire
MMOC Member: No

Re: is dot4 synthetic compatible?

Post by Stig »

Neil MG wrote:DOT5 silicon is definitely NOT compatible with DOT4!
Where do you get that from?

It says on the bottle that DOT5 silicone can be mixed with DOT4 and I've done it with no problems whatsoever.
Neil MG
Minor Legend
Posts: 1116
Joined: Sat Jan 15, 2011 8:05 am
Location: Cumbria
MMOC Member: No

Re: is dot4 synthetic compatible?

Post by Neil MG »

Stig28 wrote:
Neil MG wrote:DOT5 silicon is definitely NOT compatible with DOT4!
Where do you get that from?

It says on the bottle that DOT5 silicone can be mixed with DOT4 and I've done it with no problems whatsoever.
Just poor a little of each into a glass jar and see! Give it a shake!

What exactly does it say on the bottle? Most probably it says that DOT5 is compatible with DOT3/4 brake systems, (not DOT3/4 fluid.)
1956 Morris Minor Series II
1959 MGA 1600 Roadster
1966 Jaguar Mk2 3.8 MOD
les
Minor Maniac
Posts: 8737
Joined: Tue Feb 12, 2002 12:00 am
Location: kent
MMOC Member: Yes

Re: is dot4 synthetic compatible?

Post by les »

I was under the impression that silicon would mix with dot4, but negated the advantages of the silicon. Will have to check on that now!
xpress
Minor Addict
Posts: 761
Joined: Wed Jul 22, 2009 10:08 am
Location: West London
MMOC Member: No

Re: is dot4 synthetic compatible?

Post by xpress »

Concur with les.

Neil MG
Minor Legend
Posts: 1116
Joined: Sat Jan 15, 2011 8:05 am
Location: Cumbria
MMOC Member: No

Re: is dot4 synthetic compatible?

Post by Neil MG »

Just for the record Silicon fluid WILL NOT mix with DOT 4. They are NOT compatible. Before switching from one to the other the system needs to be completely flushed and ideally all seals and hoses changed!

There is a lot of debate over which is best silicon or DOT 4 and I could not hope to ever find agreement there. I am in the silicon camp because it doesn't damage paint and doesn't need to be changed every two years. But I also respect that some people have had problems and would never use it.

There should be no debate about compatibility! Again I would say for an immediate evidence of this just mix a little of each in a container. Give it a good shake or stir and watch the two fluids emulsify and then settle.

My advice to anyone who has mixed fluids is to drain and flush the system, change the seals and hoses and refill with one or the other.
1956 Morris Minor Series II
1959 MGA 1600 Roadster
1966 Jaguar Mk2 3.8 MOD
Stig
Minor Addict
Posts: 737
Joined: Wed Oct 13, 2004 1:25 pm
Location: Berkshire
MMOC Member: No

Re: is dot4 synthetic compatible?

Post by Stig »

I didn't say they'd mix, they're different densities so they don't. That doesn't mean they're not compatible. After all, water does mix rather well with glycol fluid but that doesn't mean it's a good idea to put it in your braking system!
Neil MG
Minor Legend
Posts: 1116
Joined: Sat Jan 15, 2011 8:05 am
Location: Cumbria
MMOC Member: No

Re: is dot4 synthetic compatible?

Post by Neil MG »

OK we can agree to differ, but I would recommend that anyone who is thinking of mixing or thinks that the two fluids may be compatible to at least do a bit of research (start with google!) before proceeding.
1956 Morris Minor Series II
1959 MGA 1600 Roadster
1966 Jaguar Mk2 3.8 MOD
charlie_morris_minor
Minor Legend
Posts: 1989
Joined: Wed May 10, 2006 1:47 pm
Location: Aldershot
MMOC Member: No

Re: is dot4 synthetic compatible?

Post by charlie_morris_minor »

my dad put silicon in his MO but that was when we replaced all cylinders and lines
xpress
Minor Addict
Posts: 761
Joined: Wed Jul 22, 2009 10:08 am
Location: West London
MMOC Member: No

Re: is dot4 synthetic compatible?

Post by xpress »

Charles are you going to brooklands? :)

charlie_morris_minor
Minor Legend
Posts: 1989
Joined: Wed May 10, 2006 1:47 pm
Location: Aldershot
MMOC Member: No

Re: is dot4 synthetic compatible?

Post by charlie_morris_minor »

No I am on call for work unfortunately
Post Reply