Extra Gauges

Discuss other problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
Pyoor_Kate
Minor Addict
Posts: 986
Joined: Fri May 28, 2004 10:22 pm
Location: Washington State, US.
MMOC Member: No

Extra Gauges

Post by Pyoor_Kate »

I know this has been discussed *loads* of times on here, but having given up on the company that supplied my water temperature gauge ever supplying the voltmeter to go with it, I've got myself a secondhand batch of Smiths' instruments (water temp, oil pressure, volts)...

Now, I've got the sender for the water temp. and the oil-pressure gauge pipe.

So, uh, what I want to know is:

I believe you can attach a T-piece to the oil-filter doobry, so that you can keep the oil pressure warning light as well as having a gauge (I'm nothing if not paranoid) - does anyone know where can you get a T piece (or am I being mad)...

And....

Any idea where I could get an adapter for the sender to fit into the block? It's a different size to the sender from my SunPro instruments... And what size the outer (hole in the block) diameter should be?

Any answers would be *much* appreciated....
Pyoor Kate
The Electric Minor Project
The Current Fleet:
1969 Morris 'thou, 4 Door. 2010 Mitsubishi iMiEV. 1920s BSA Pushbike. 1930s Raleigh pushbike.
The Ex-Fleet:
1974 & 1975 Daf 44s, 1975 Enfield 8000 EV, 1989 Yugo 45, 1981 Golf Mk1, 1971 Vauxhall Viva, 1989 MZ ETZ 125, 1989 Volvo Vario 340, 1990, 1996 & 1997 MZ/Kanuni ETZ 251s
Desires:
Trabant 601, Tatra T603, Series II Landy, Moskvitch-401, Vincent HRD Black Shadow, Huge garage, Job in Washington State.
rayofleamington
Moderator
Moderator
Posts: 7679
Joined: Fri Nov 01, 2002 2:55 pm
Location: LEAMINGTON SPA
MMOC Member: No

Post by rayofleamington »

does anyone know where can you get a T piece
try a Mini autojumble - it's the kind of thing they get through by the bucketload.
edjones
Minor Friendly
Posts: 87
Joined: Sat Feb 23, 2002 12:00 am
Location: Cheshire
MMOC Member: No

Post by edjones »

As Ray says an autojumble should yield the best choice.

BUT having said that I recently got a Smiths oil pressure gauge with pipe for £2 from a fair, but no T piece/converters. I went to my little local motor shop and was offered a selection of no less than 3 T piece kits and a host of converters!

In the end I had the T piece kit (for £2.50) and didn't need any converters (though one converter was actually included in the T piece pack).

My T piece screws straight into the block, the oil pressure pipe goes in one side, and the warning light sender goes in the other.
You may also find that the pressure sender is in fact the right size. It may be a taper fit so does not need to screw in all the way, just until tight ish or so. Mine is like this and does not leak a drop.

Hope this helps and is not just waffle!

Cheers
Kevin
Moderator
Moderator
Posts: 7592
Joined: Thu Feb 14, 2002 12:00 am
Location: Watford, Hertfordshire.
MMOC Member: No

Post by Kevin »

Just try your local mini specialist they will have all the right bits or if you dont have one try Demon Tweeks as they sell all the bits and often have outlets within Halfrauds
http://www.demon-tweeks.co.uk/
Cheers

Kevin
Lovejoy 1968 Smoke Grey Traveller (gone to a new home after13 years)

Herts Branch Member
Moderator MMOC 44706
Cam
Moderator
Moderator
Posts: 5108
Joined: Mon May 20, 2002 1:00 am
Location: Stoke-on-Trent, Staffordshire, UK
MMOC Member: No

Post by Cam »

I got mine from Minispares or Minisport. I think they both do them.
Post Reply