How safe are braided fuel pipes?
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Fan
- Posts: 236
- Joined: Sat Sep 04, 2010 6:40 pm
- Location: Somewhere in France
- MMOC Member: No
Re: How safe are braided fuel pipes?
Well, it looks like I have been taken in! Fuel pipes should be reliable braided or otherwise. There is no guarantee that the one they send me will be safe.
http://www.ehow.com/info_12245926_cause ... cking.html
http://www.ehow.com/info_12245926_cause ... cking.html
-
- Minor Legend
- Posts: 2775
- Joined: Mon Dec 12, 2011 7:20 pm
- Location: LANCASHIRE (paradise)
- MMOC Member: Yes
Re: How safe are braided fuel pipes?
If you go to a local motor factors as suggested, and buy a length of petrol hose there (with enough on the roll to do the job twice), you can be sure that it has been made to rigorous standards - just look what is printed on the hose itself.
I know you are being sent one for free but in future I wouldn't give the suppliers any consideration when it comes to consumables like this - they are more expensive and prove to be substandard.
I know you are being sent one for free but in future I wouldn't give the suppliers any consideration when it comes to consumables like this - they are more expensive and prove to be substandard.
-
- Minor Fan
- Posts: 133
- Joined: Sun Feb 08, 2009 11:10 pm
- MMOC Member: Yes
Re: How safe are braided fuel pipes?
Am I missing something here? I always thought that the braded type was correct fitment, not aftermarket. My series mm certainly had an original type with banjo fittings and that was braided. I might buy some standard hose to take as spare though.
1951 Series MM Lowlight
1954 Series II Four Door De Lux 'The Bomb'
1954 Series II Four Door De Lux 'The Bomb'
Re: How safe are braided fuel pipes?
If one company decided to do things properly, they would have the entire market to themselves....
-
- Moderator
- Posts: 7679
- Joined: Fri Nov 01, 2002 2:55 pm
- Location: LEAMINGTON SPA
- MMOC Member: No
Re: How safe are braided fuel pipes?
Metal braided hoses are themselves not a problem - the braiding is used to improve the burst pressure (or reduce compliance) on high pressure hoses. Hence they are used on race cars braking systems etc.. and are often referred to as 'Aeroquip' hoses, although that's just one manufacturer and many others exist. They are also used on fuel lines as they give a better mechanical protection (and also to add 'bling') for a bit of extra protection.
The issue is not 'braided hose' - it is use of poor / wrong materials for the particular fluid.
Hoses that work with conventional brake fluid (e.g. EPDM material) are not compatible with mineral fluid such as oil & petrol/diesel. Conversely hoses for mineral fluids (e.g. nitrile / NBR material) are not compatible with conventional brake fluid.
Hoses that are cheap (e.g. PVC with a lot of junk & filler) shouldn't be used on anything safety critical!
I've only worked on one Series MM recently and have already forgotten what the fuel hose looked like.
Of the one's I've seen, some a few had aftermarket hose - sorry I'm really not much help!
For Minor 1000 - many hoses were 'cloth' braided. I don't think any were metal braided hoses from the factory.
The issue is not 'braided hose' - it is use of poor / wrong materials for the particular fluid.
Hoses that work with conventional brake fluid (e.g. EPDM material) are not compatible with mineral fluid such as oil & petrol/diesel. Conversely hoses for mineral fluids (e.g. nitrile / NBR material) are not compatible with conventional brake fluid.
Hoses that are cheap (e.g. PVC with a lot of junk & filler) shouldn't be used on anything safety critical!
Do you mean metal braiding or cloth reinforcing?Am I missing something here? I always thought that the braided type was correct fitment, not aftermarket. My series mm certainly had an original type with banjo fittings and that was braided
I've only worked on one Series MM recently and have already forgotten what the fuel hose looked like.
Of the one's I've seen, some a few had aftermarket hose - sorry I'm really not much help!
For Minor 1000 - many hoses were 'cloth' braided. I don't think any were metal braided hoses from the factory.
Ray. MMOC#47368. Forum moderator.
Jan 06: The Minor SII Africa adventure: http://www.minor-detour.com
Oct 06: back from Dresden with my Trabant 601 Kombi
Jan 07: back from a month thru North Africa (via Timbuktu) in a S3 Landy
June 07 - back from Zwickau Trabi Treffen
Aug 07 & Aug 08 - back from the Lands End to Orkney in 71 pickup
Sept 2010 - finally gave up breaking down in a SII Landy...
where to break down next?
2013... managed to seize my 1275 just by driving it round the block
Jan 06: The Minor SII Africa adventure: http://www.minor-detour.com
Oct 06: back from Dresden with my Trabant 601 Kombi
Jan 07: back from a month thru North Africa (via Timbuktu) in a S3 Landy
June 07 - back from Zwickau Trabi Treffen
Aug 07 & Aug 08 - back from the Lands End to Orkney in 71 pickup
Sept 2010 - finally gave up breaking down in a SII Landy...
where to break down next?
2013... managed to seize my 1275 just by driving it round the block
-
- Minor Fan
- Posts: 133
- Joined: Sun Feb 08, 2009 11:10 pm
- MMOC Member: Yes
Re: How safe are braided fuel pipes?
I found this pic of my old series MM showing the original type of 'Banjo' pump to carb pipe. It was a steel braid.
I might have one in the garage, if I find it I'll take a pic.
I might have one in the garage, if I find it I'll take a pic.
1951 Series MM Lowlight
1954 Series II Four Door De Lux 'The Bomb'
1954 Series II Four Door De Lux 'The Bomb'
-
- Minor Legend
- Posts: 2775
- Joined: Mon Dec 12, 2011 7:20 pm
- Location: LANCASHIRE (paradise)
- MMOC Member: Yes
Re: How safe are braided fuel pipes?
Of course, a lot of complaints come from the parsimonious owner who isn't prepared to stump up the cash to buy a part of really lasting quality.
But in cases such as this we have owners buying in good faith from 'specialist' suppliers and the goods don't last for very long. Same with repro chrome bumper blades. Vance Packard would have had a field day!
But in cases such as this we have owners buying in good faith from 'specialist' suppliers and the goods don't last for very long. Same with repro chrome bumper blades. Vance Packard would have had a field day!
-
- Minor Legend
- Posts: 3773
- Joined: Wed Jul 14, 2010 10:53 am
- Location: South Manchester
- MMOC Member: Yes
Re: How safe are braided fuel pipes?
That's a good word Josh parsimonious better than*********
-
- Minor Legend
- Posts: 2775
- Joined: Mon Dec 12, 2011 7:20 pm
- Location: LANCASHIRE (paradise)
- MMOC Member: Yes
-
- Minor Fan
- Posts: 163
- Joined: Wed May 03, 2006 12:00 am
- Location: california usa.
- MMOC Member: No
Re: How safe are braided fuel pipes?
I have allways used high pressure hose ,used on fuel injection .cars.
e g B M W ,T he hose I used was for a 325. Check the inside dia'.
Kenny.
e g B M W ,T he hose I used was for a 325. Check the inside dia'.
Kenny.
-
- Minor Fan
- Posts: 236
- Joined: Sat Sep 04, 2010 6:40 pm
- Location: Somewhere in France
- MMOC Member: No
Re: How safe are braided fuel pipes?
We are talking about a potentially lethal item here, poorly chromed repro bumpers are just not in the same league. I would gladly have paid more to have a good quality item especially when it concerns safety. Although it is very annoying to buy a new bumper and having it break out in rust spots after only a few months, having ones car go up in flames is far worse.
-
- Minor Friendly
- Posts: 27
- Joined: Wed Mar 30, 2011 9:45 pm
- Location: Leicester
- MMOC Member: No
Re: How safe are braided fuel pipes?
I work at a hydraulics distributor and we sell all manner of hose. Rayofleamington is quite correct, there are many types of rubber, resistant to different fluids. Motor factors will stock the correct hose for the correct application, speak to them for advice.
The braiding (steel or fabric) enables the hose to withstand a higher pressure, and also helps as protection.
Pete
The braiding (steel or fabric) enables the hose to withstand a higher pressure, and also helps as protection.
Pete
-
- Minor Legend
- Posts: 1140
- Joined: Thu Jan 19, 2012 4:55 pm
- Location: Le Tronquay, nr Bayeux, en France - Pop in for a cuppa!
- MMOC Member: No
Re: How safe are braided fuel pipes?
Yes, but the fuel system in a (standard) Minor isn't high pressure! A rubber hose from the motor factors is fine for a standard Minor.
-
- Minor Friendly
- Posts: 27
- Joined: Wed Mar 30, 2011 9:45 pm
- Location: Leicester
- MMOC Member: No
Re: How safe are braided fuel pipes?
You're right chesney, I didn't explain myself very well
I meant the rubber hose from a motor factor will be correct, a braided hose just has other benefits
I meant the rubber hose from a motor factor will be correct, a braided hose just has other benefits
-
- Minor Fan
- Posts: 236
- Joined: Sat Sep 04, 2010 6:40 pm
- Location: Somewhere in France
- MMOC Member: No
Re: How safe are braided fuel pipes?
Just an update on this saga, I have today received a replacement fuel hose from the original suppliers. It is reinforced rubber and has the marking 'W=FUEL HOSE SAE J30 R6 SUITABLE FOR UNLEADED 1/4" ' Can this be fitted with confidence? Thanks and regards to all.
-
- Minor Fan
- Posts: 135
- Joined: Sat Jul 18, 2009 10:17 pm
- Location: West Sussex
- MMOC Member: No
Re: How safe are braided fuel pipes?
My local garage fitted a new braided hose for an MOT. less than 2 years later it had perished and over the winter it split into about 4 bits.
I wouldn't fit another one.
I wouldn't fit another one.