Clip on Door Mirrors

[Tezm8]

I have a 1960 morris I bought it only a couple of weeks ago the only thing is that it doesn't have any door mirrors fitted I don't want to start drilling in to the cars body but I want to be safe so I thought I would get some clip on ones I have not bought them yet and I know there not as good as fitted ones but it's what I want just for now anyway. The only thing is I don't know where they would clip on to the car can anyone advice me on this thank you

[benwall101]

Hi
The clip on mirrors clip onto the edge of the qauter lights. Most pepole only have one low down on the drivers side, but i preffer two high up on both sides so i can see more




Hope this helps

[kennatt]

tom roy,sells a door mirror that fixes to the frame of the window,relatively simple job,and MUCH better than,clip on.Give them a ring,Not got them Myself,but in his reception he has some fixed to a window frame as a display ,looks realy good.I actually modified a clip on to fit it the same way,but required bending to fit.Not worth doing unless you allready have a clip on.

[Trickydicky]

I have one on mine and it does the job well, it clips/ bolts onto the window frame without drilling any holes. The only gripe I have with it is that it is easily knocked and have to readjust it as it is on a balljoint knuckle.

[Daisy1968]

Hello

I have one of these mirrors that I would like to fit - is there any chance of a close up photo to show where you have fixed it ? Thanks in advance !

Sandra

[LouiseM]

There are instructions and a photo in this thread which might be helpful: http://www.mmoc.org.uk/viewtopic.php?f= ... +on+mirror

[Trickydicky]

Here you go [frame][/frame]

[Tezm8]

Thanks guys for the help and the pictures really appreciate it

[kennatt]

the one tom roy sell fit on the front of the window frame ill get a shot of my modded one as soon as I can get out to the garage.

[kennatt]

[frame][/frame][frame][/frame]

was originally a clip on,onto the vertical window slider,but after seeing the tom roys ones,fitted in same place modded the clip on,need to bend the support slightly but works fine.no shake.