New Traveller Restoration Undertaken

Let us all know what you are up to with your current restoration project. Get that Minor on the road!
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
irmscher
Minor Legend
Posts: 3773
Joined: Wed Jul 14, 2010 10:53 am
Location: South Manchester
MMOC Member: Yes

Re: New Traveller Restoration Undertaken

Post by irmscher »

Light oak will look good with smoke grey :)
Smithy1961
Minor Fan
Posts: 147
Joined: Thu Nov 10, 2016 9:02 am
MMOC Member: Yes

Re: New Traveller Restoration Undertaken

Post by Smithy1961 »

Yes Im waiting for a sample of ash to test the stain on . I got Sikkens filter 7 plus stain.

I struggled with the mini heater but got it fitted ,I want to work out a solution for the air intake .
the older cars have an intake on the floor and later via an ugly pipe to the front grill , neither are good for me fume wise , as the mini heater has two vanes and an intake to recirulate Im thinking an intake with an on and off mechanism.
Smithy1961
Minor Fan
Posts: 147
Joined: Thu Nov 10, 2016 9:02 am
MMOC Member: Yes

Re: New Traveller Restoration Undertaken

Post by Smithy1961 »

Finally got the heater in and working, done a few more bits and bobs under the bonnet.

Working on the bonnet now got a nice soundproofing pad an extending bonnet prop .
2.jpg
2.jpg (104.42 KiB) Viewed 3397 times
1.jpg
1.jpg (123.66 KiB) Viewed 3397 times
Smithy1961
Minor Fan
Posts: 147
Joined: Thu Nov 10, 2016 9:02 am
MMOC Member: Yes

Re: New Traveller Restoration Undertaken

Post by Smithy1961 »

Painted the surrounding area that the bonnet closes on in the engine bay and got the bonnet and bonnet brace painted and adding the bonnet sound proofing.
Screen Shot 2017-03-25 at 16.23.49.jpg
Screen Shot 2017-03-25 at 16.23.49.jpg (158.1 KiB) Viewed 3379 times
All most done under in the engine bay[under bonnet area].
Screen Shot 2017-03-25 at 16.23.38.jpg
Screen Shot 2017-03-25 at 16.23.38.jpg (208.35 KiB) Viewed 3379 times
greendefender123
Minor Addict
Posts: 762
Joined: Mon Jul 27, 2015 6:10 pm
Location: Brompton Regis nrDulverton
MMOC Member: No

Re: New Traveller Restoration Undertaken

Post by greendefender123 »

That looks really good. Well done. Does the bonnet sound proofing make much difference?
Smithy1961
Minor Fan
Posts: 147
Joined: Thu Nov 10, 2016 9:02 am
MMOC Member: Yes

Re: New Traveller Restoration Undertaken

Post by Smithy1961 »

Well it looks good and is suppose to really suppress the noise
Smithy1961
Minor Fan
Posts: 147
Joined: Thu Nov 10, 2016 9:02 am
MMOC Member: Yes

Re: New Traveller Restoration Undertaken

Post by Smithy1961 »

This was how it was before
Attachments
before under bonnet.jpg
before under bonnet.jpg (159.41 KiB) Viewed 3373 times
before bonnet.jpeg
before bonnet.jpeg (157.39 KiB) Viewed 3373 times
SageGreenPete
Minor Fan
Posts: 178
Joined: Tue Jan 31, 2017 9:41 pm
MMOC Member: No

Re: New Traveller Restoration Undertaken

Post by SageGreenPete »

Love the BMC green servo!
Smithy1961
Minor Fan
Posts: 147
Joined: Thu Nov 10, 2016 9:02 am
MMOC Member: Yes

Re: New Traveller Restoration Undertaken

Post by Smithy1961 »

Yes the BMC green servo ....Thats going to be balanced by the big original horn assembly thats to be fitted on the other side thats also BMC green
Smithy1961
Minor Fan
Posts: 147
Joined: Thu Nov 10, 2016 9:02 am
MMOC Member: Yes

Re: New Traveller Restoration Undertaken

Post by Smithy1961 »

So onto doing the brakes next.

Got all needed to change from 7 inch to 8 inch on the front . This is going to be driven sedately so that with the servo on the front only should work and make it a bit easier.
The rears are sticking on so all new clyds front and back new flex hoses, shoes and front drums.

So far its the cost of the later front adjusters and masks that seem expensive but you got to get what you got to get...
Smithy1961
Minor Fan
Posts: 147
Joined: Thu Nov 10, 2016 9:02 am
MMOC Member: Yes

Re: New Traveller Restoration Undertaken

Post by Smithy1961 »

Got the new front 8 inch brakes built on the bench ready to fit and now turning also to the wood.
Got a complete kit coming [Woodies, ETA now only a few weeks I hope] together with inner waist cappings but I was hoping to reuse the top hoop, the 2 b post cappings and upper cappings, these are in perfect condition, however the problem is the interior was stained a very deep brown so I have been attempting to bleach that colour out so everything will be light oak and match. Seems to be working.
2 (2).jpg
2 (2).jpg (42.27 KiB) Viewed 3329 times
2 (1).jpg
2 (1).jpg (48.98 KiB) Viewed 3329 times
Next will be taking all the wood off and looking at any repairs that are needed prior to new wood fitting . Im looking forward to this stage.
SageGreenPete
Minor Fan
Posts: 178
Joined: Tue Jan 31, 2017 9:41 pm
MMOC Member: No

Re: New Traveller Restoration Undertaken

Post by SageGreenPete »

If the rest comes out like the engine bay thats going to be a crackin' traveller! I'm crap at woodwork, I'd make a right mess of it.
Smithy1961
Minor Fan
Posts: 147
Joined: Thu Nov 10, 2016 9:02 am
MMOC Member: Yes

Re: New Traveller Restoration Undertaken

Post by Smithy1961 »

Attached the bonnet [much better access with the new extending bonnet prop]
Attachments
1.jpg
1.jpg (101.83 KiB) Viewed 3310 times
Last edited by Smithy1961 on Sun Apr 09, 2017 1:51 pm, edited 2 times in total.
Smithy1961
Minor Fan
Posts: 147
Joined: Thu Nov 10, 2016 9:02 am
MMOC Member: Yes

Re: New Traveller Restoration Undertaken

Post by Smithy1961 »

Started to look at the exterior wood prior to removal and it looks like it might of removed its self if it had gone much longer.The o/s/rear corner just crumbled in my hand.

12.jpg
12.jpg (58.01 KiB) Viewed 3313 times
13.jpg
13.jpg (86.18 KiB) Viewed 3313 times
14.jpg
14.jpg (63.87 KiB) Viewed 3313 times
greendefender123
Minor Addict
Posts: 762
Joined: Mon Jul 27, 2015 6:10 pm
Location: Brompton Regis nrDulverton
MMOC Member: No

Re: New Traveller Restoration Undertaken

Post by greendefender123 »

That bonnet prop looks a good idea! Hope you don't find to many disasters when you take the wood off.
jagnut66
Minor Legend
Posts: 3635
Joined: Fri Apr 11, 2008 7:28 pm
Location: Mansfield, Nottinghamshire.
MMOC Member: Yes

Re: New Traveller Restoration Undertaken

Post by jagnut66 »

Hi,
I've fitted one of those extending props too. They are excellent value for money, creating so much more room to work / remove the engine when needed.
Plus I was fed up with banging my head!!.......................... :roll:
Looks like you bought that new wood in the nick of time.
Best wishes,
Mike.
1954 Series 2: 4 door: "Sally" -- Back on the ground with (slave) wheels and waiting to be resprayed......
1970 Triumph Herald 1200: "Hetty" -- Driven back from Llangollen in Wales (twice.....)
Smithy1961
Minor Fan
Posts: 147
Joined: Thu Nov 10, 2016 9:02 am
MMOC Member: Yes

Re: New Traveller Restoration Undertaken

Post by Smithy1961 »

Yes still lots to do.

The wood replacement Im expecting to be an epic journey.
Im not so scared about the wood in this phase of the work per say as much as some of the things you have to tackle like the roof/guttering and my main dread the headlining.
Smithy1961
Minor Fan
Posts: 147
Joined: Thu Nov 10, 2016 9:02 am
MMOC Member: Yes

Re: New Traveller Restoration Undertaken

Post by Smithy1961 »

At some point doing the wood im going to fit a split charging battery system.
The Aux. battery to be fitted somewhere in the rear .
The Idea is when camping It has its own 12 volt deep cycle supply that can be used with access plugs in the rear that if over used wont drain the main battery .
I fancy having the ability to have 12 volt lighting and maybe a cooler back there. I fitted a high output alternator with this in mind.
greendefender123
Minor Addict
Posts: 762
Joined: Mon Jul 27, 2015 6:10 pm
Location: Brompton Regis nrDulverton
MMOC Member: No

Re: New Traveller Restoration Undertaken

Post by greendefender123 »

With regards to the wood and gutter if I can do it looking alright/good im sure youll have no problems. I made a split charge system in my landy. All I had was a relay between the 2 batteries and wired the relay to come on with the "ignition" was handy if you left the lights on. You can also do it with voltage sensitive relays or just a simple switch and remember to flick it on or off. Should be good with the battery in the back. You could also build it into a box and take out by just unplugging when your not using it. Or to use it as a portable power pack.
Smithy1961
Minor Fan
Posts: 147
Joined: Thu Nov 10, 2016 9:02 am
MMOC Member: Yes

Re: New Traveller Restoration Undertaken

Post by Smithy1961 »

I started on the wood to day and got about a third done .

The wood was well rotten [that actually made it a bit easier ]. Im hoping to see the rest off over the next two weekends so I know what metal repairs are needed but so far so good.
3 (1).jpg
3 (1).jpg (133.43 KiB) Viewed 3260 times
3 (2).jpg
3 (2).jpg (55.53 KiB) Viewed 3260 times
1.jpg
1.jpg (146.2 KiB) Viewed 3260 times
Post Reply