1966 Minor 1000 tweaks and modernisations!
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
1966 Minor 1000 tweaks and modernisations!
Hi! I've had my first Morris Minor (first classic car too) for two weeks now. It's in good condition and completely original. Jobs completed so far:
Rocker cover gasket and bolt seals replaced;
Float gasket and air filter replaced;
Glove compartment above steering wheel fixed (it was all warped from water ingress, so wetted it thoroughly and dried it with a heavy weight on it.
A bloody good hoover.
The next big job is to insulate and soundproof! So have stripped out the insides and am laying Silent Coat first, then Dodo mat on top. It will be finished off with the fitted carpet from Newton Commercial. The Silent Coat stuff lays like a dream, so easy!!!
Rocker cover gasket and bolt seals replaced;
Float gasket and air filter replaced;
Glove compartment above steering wheel fixed (it was all warped from water ingress, so wetted it thoroughly and dried it with a heavy weight on it.
A bloody good hoover.
The next big job is to insulate and soundproof! So have stripped out the insides and am laying Silent Coat first, then Dodo mat on top. It will be finished off with the fitted carpet from Newton Commercial. The Silent Coat stuff lays like a dream, so easy!!!
- Attachments
-
- DSC_0834.JPG (1.98 MiB) Viewed 7541 times
-
- DSC_0833-2.JPG (2.23 MiB) Viewed 7541 times
-
- Minor Maniac
- Posts: 10859
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
Re: 1966 Minor 1000 tweaks and modernisations!
Welcome to the world of Morris Minors.
https://www.silentcoat.co.uk/
I would advise against sticking the sound deadening down as it can trap moisture between the floor and the sound deadening which will lead to rusting of the floor pan.
Philo
https://www.silentcoat.co.uk/
I would advise against sticking the sound deadening down as it can trap moisture between the floor and the sound deadening which will lead to rusting of the floor pan.
Philo
Re: 1966 Minor 1000 tweaks and modernisations!
On the to-do list:
- oil filter converter and new oil filter
- window seals in all doors (it's a 4 door)
- replace the fuzzy window seals (don't know what they are called!)
- replace the quarter lights
- replace the gaiter and scuttle panels
- replace spark plugs
- replace the parcel shelf
Luckily, I bought the car for quite a bit under budget so have been able to get all the parts with the leftovers.
After that, who knows! My other half is a petrol head and is loving teaching me how to do all the engine jobs, he will always be thinking of the next thing to do.
Eventually, change the drum brakes for disc brakes but I've ran out of money for that!
- oil filter converter and new oil filter
- window seals in all doors (it's a 4 door)
- replace the fuzzy window seals (don't know what they are called!)
- replace the quarter lights
- replace the gaiter and scuttle panels
- replace spark plugs
- replace the parcel shelf
Luckily, I bought the car for quite a bit under budget so have been able to get all the parts with the leftovers.
After that, who knows! My other half is a petrol head and is loving teaching me how to do all the engine jobs, he will always be thinking of the next thing to do.
Eventually, change the drum brakes for disc brakes but I've ran out of money for that!
-
- Minor Legend
- Posts: 2947
- Joined: Tue Aug 25, 2015 6:07 pm
- MMOC Member: No
Re: 1966 Minor 1000 tweaks and modernisations!
be careful that it does not retain water as Morrises tends to leak from the windscreen rubber and from missing floor grommets. Have a look at that weld over the cross member and inner offside sill, it may be fine but ........
-
- Minor Legend
- Posts: 2953
- Joined: Mon May 16, 2016 4:39 pm
- Location: Kidderminster, Worcestershire.
- MMOC Member: Yes
Re: 1966 Minor 1000 tweaks and modernisations!
Welcome from me as well. Enjoy your Minor and enjoy the forum.
1956 4-door called Max
Re: 1966 Minor 1000 tweaks and modernisations!
Thanks for the welcome!
The silent coat stuff is bitumen-esque so shouldn't retain water, but would be interested to hear if people have had issues with it...
The weld over the cross member is not the prettiest, will have a look at it tomorrow. Luckily I did the CSWIP weld inspector course a few years ago but am a bit rusty (har har). What do you suggest to keep an eye out for with it? The previous owner was a panel beater so was hoping his patches are of decent quality.
The silent coat stuff is bitumen-esque so shouldn't retain water, but would be interested to hear if people have had issues with it...
The weld over the cross member is not the prettiest, will have a look at it tomorrow. Luckily I did the CSWIP weld inspector course a few years ago but am a bit rusty (har har). What do you suggest to keep an eye out for with it? The previous owner was a panel beater so was hoping his patches are of decent quality.
-
- Minor Legend
- Posts: 2947
- Joined: Tue Aug 25, 2015 6:07 pm
- MMOC Member: No
Re: 1966 Minor 1000 tweaks and modernisations!
Patches will do short term but always best eventually to cut out rot and replace with new panels suitably treated. It looks as though the floor pan has gone at that point necessitating the patch but the cross-member is a critical part of the car's strength . Sills likewise. A multitude of sis can be hidden under underseal.
Re: 1966 Minor 1000 tweaks and modernisations!
Thanks @firedrake1942! We'll remove the patch to see what is there and replace with a new bit if steel if it's a botch job.
-
- Minor Legend
- Posts: 2947
- Joined: Tue Aug 25, 2015 6:07 pm
- MMOC Member: No
Re: 1966 Minor 1000 tweaks and modernisations!
If there is a match there, the chances are that the cross member itself may be dodgy. CW and ESM (Excellent next day delivery) have all the panels.
http://www.morrisminorspares.com/body-i ... panels-c31
http://www.morrisminorspareparts.co.uk/ ... els-timber
Good luck!
http://www.morrisminorspares.com/body-i ... panels-c31
http://www.morrisminorspareparts.co.uk/ ... els-timber
Good luck!
Re: 1966 Minor 1000 tweaks and modernisations!
@firedrake1942, thanks for the heads up on checking the welded bit, it was a patch as opposed to a repair so have cut out.
Looks like a cross member as well as the driver side sill (?) need to be replaced.
On the plus side, learned how to drill out spot welds, grind out welds and cut out using the grinder.
So much for just adding a bit of sound proofing...
Looks like a cross member as well as the driver side sill (?) need to be replaced.
On the plus side, learned how to drill out spot welds, grind out welds and cut out using the grinder.
So much for just adding a bit of sound proofing...
- Attachments
-
- DSC_0843.JPG (3.76 MiB) Viewed 7460 times
-
- DSC_0841.JPG (3.8 MiB) Viewed 7460 times
-
- DSC_0840.JPG (3.4 MiB) Viewed 7460 times
Re: 1966 Minor 1000 tweaks and modernisations!
Girls and their toys...
- Attachments
-
- FB_IMG_1502046001658.jpg (66.7 KiB) Viewed 7709 times
-
- FB_IMG_1502045998899.jpg (59.36 KiB) Viewed 7709 times
-
- Minor Addict
- Posts: 762
- Joined: Mon Jul 27, 2015 6:10 pm
- Location: Brompton Regis nrDulverton
- MMOC Member: No
Re: 1966 Minor 1000 tweaks and modernisations!
Look at the rest of the crossmember from underneath. If it looks ok you can repair the top of it, butt weld the new floor repair on it then plug weld through this to the top of the crossmember to finish it off you can then seal the crossmember to floor join with a seam sealer. I did this on one side with mine as only one side needed replacing. That way you'll have a good a repair that should last aslong as the rest of the floor and your not replacing things that don't need it yet.
Steve
Steve
-
- Minor Legend
- Posts: 2947
- Joined: Tue Aug 25, 2015 6:07 pm
- MMOC Member: No
Re: 1966 Minor 1000 tweaks and modernisations!
OOOPs sorry but I have learned from mine..... that what appears solid occasionally isn't and also where are the usual corrosion points on the minor. Yours does look remarkably solid and hopefully the cross member can be saved, but if not you have the satisfaction of knowing that all IS actually solid and safe. Good luck and keep the pictures coming.
-
- Minor Legend
- Posts: 2953
- Joined: Mon May 16, 2016 4:39 pm
- Location: Kidderminster, Worcestershire.
- MMOC Member: Yes
Re: 1966 Minor 1000 tweaks and modernisations!
The pleasures of Minor ownership! A simple task reveals something more significant. At least you know and you're tackling it straight away!
1956 4-door called Max
Re: 1966 Minor 1000 tweaks and modernisations!
Cheers guys! There's some really bubbly welding on the underside of the crossmember (passenger side) and on the driver side sills, will take pics when he's on stilts. My other half (also my teacher and technical expert) is a bit unsure of what approach to take so some advice may be required!!
-
- Minor Addict
- Posts: 956
- Joined: Fri Aug 26, 2011 12:42 pm
- Location: West Yorkshire
- MMOC Member: Yes
Re: 1966 Minor 1000 tweaks and modernisations!
One very expensive lesson I've learned is to cover all glass before using the angle grinder - not obvious until you come to clean up but tiny spots of metal melt into the surface of the glass and can't be polished out. I've had to replace the windscreen, front door glass and quarterlights Don't forget the speedo glass as well!
Mark
Mark
-
- Minor Legend
- Posts: 1377
- Joined: Tue Mar 26, 2013 8:20 pm
- Location: Chelmsford, essex
- MMOC Member: No
Re: 1966 Minor 1000 tweaks and modernisations!
Replacing the cross member is not too difficult from the welding point of view, but if you can get away with it replacing just the outer ends is much easier on an assebled car (otherwise fuel lines, brake lines, wiring, propshaft and exhaust are all in the way) .
The corrosion usually starts around the jacking point the capability of which is pretty marginal even on a perfect car, I have left them off ours. Take a look at the other restoration threads such as ours they give you a good idea of what is involved with repairing this area.
The corrosion usually starts around the jacking point the capability of which is pretty marginal even on a perfect car, I have left them off ours. Take a look at the other restoration threads such as ours they give you a good idea of what is involved with repairing this area.
-
- Minor Legend
- Posts: 2147
- Joined: Mon May 10, 2004 9:10 pm
- Location: Oxford, UK
- MMOC Member: Yes
Re: 1966 Minor 1000 tweaks and modernisations!
I had exactly the same thought when I saw the photograph. The driver's door glass still bears witness to the restoration work carried out 20 years ago - I MUST get round to replacing it!One very expensive lesson I've learned is to cover all glass before using the angle grinder
Definitely cover all glass when grinding.
Going back to the original post about sound proofing, we have fairly thick mat (~10mm) all across the floor, up the bulkhead and under the rear seat. In addition we have 'anti-drum' stick-on panels inside the doors. The result is a surprisingly quiet car at 'normal' cruising speeds, when the most intrusive noise is wind with the hood up or down, but then it is a convertible! At high revs the exhaust becomes more noticeable, but that is to be expected with the engine spec.
Richard
-
- Minor Legend
- Posts: 2646
- Joined: Thu May 11, 2006 10:34 am
- Location: Cardiff
- MMOC Member: Yes
Re: 1966 Minor 1000 tweaks and modernisations!
10/10 for the safety equipment!!!!!
If you've done the CSWIP course, you might need to close your eyes when you read some of the threads on here.
If you've done the CSWIP course, you might need to close your eyes when you read some of the threads on here.
Cardiff, UK