Scuttle / Kick Panel Installation Advice

Discuss other problems here.

Moderator: Moderators

MichaelBeck
Minor Friendly
Posts: 15
Joined: Thu Dec 26, 2013 2:35 am
MMOC Member: No

Scuttle / Kick Panel Installation Advice

Postby MichaelBeck » Sun Oct 21, 2018 11:52 am

Hi Guys

I have new scuttle / kick panels. I see the loose flap of material that will be secured by the draught strip and the parcel shelf screws. Are there any other securing fixtures for the panels or is that it & it is held in by the carpet at the bottom?

RobThomas
Minor Legend
Posts: 2548
Joined: Thu May 11, 2006 10:34 am
MMOC Member: Yes

Re: Scuttle / Kick Panel Installation Advice

Postby RobThomas » Sun Oct 21, 2018 12:52 pm

Not sure of the age of your car, but, Series MM had 3 screws vertically lined up about an inch in from the draught excluder and then at the front by the parcel shelf. Not 100% sure the little flap was used on the original cars. Someone into later cars might help on this.
Cardiff, UK

Online
myoldjalopy
Minor Legend
Posts: 1133
Joined: Tue Jan 29, 2013 10:32 pm
MMOC Member: Yes

Re: Scuttle / Kick Panel Installation Advice

Postby myoldjalopy » Sun Oct 21, 2018 6:11 pm

Its the same on mine - 1955 SII. I think thats pretty standard.........don't think any flaps were secured under the draught excluder, just glued to the back of the panel.

irmscher
Minor Legend
Posts: 3621
Joined: Wed Jul 14, 2010 10:53 am
MMOC Member: Yes

Re: Scuttle / Kick Panel Installation Advice

Postby irmscher » Tue Oct 23, 2018 1:24 am

Just glued


Who is online

Users browsing this forum: No registered users and 3 guests